Cut Sheet

Black EPDM Tubing (on plastic core) ==>(LH-A100-1762-5) 06/09/17
__________________________________________________________________________________________
Page 4 of 4
SECTION 13: Disposal considerations
Dispose of contents/container in accordance with the local/regional/national/international regulations.
SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.
SECTION 15: Regulatory information
Chemical Inventories
This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory requirements.
SECTION 16: Other information
NFPA Hazard Classification
Health: 0 Flammability: 1 Instability: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
Document Group:
34-7684-3
Version Number:
3.05
Issue Date:
06/09/17
Supercedes Date:
02/01/17
DISCLAIMER: The information in this Article Information Sheet (AIS) is believed to be correct as of the date
issued.3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE.User is responsible for determining whether the3Mproduct is fit for a particular
purpose and suitable for user's method of use or application.Given the variety of factors that can affect the use and application
of a3Mproduct, some of which are uniquely within the user's knowledge and control,it is essential that the user evaluate
the3Mproduct to determine whether it is fit for a particular purpose and suitable for user's method of use or application.
3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic
transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its
completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the
AIS available directly from3M.
3M USA AISs are available at www.3M.com