Cut Sheet

ManualsBrands3M ManualsCold ShrinkQSII REPAIR SPLICE KIT

5411 Series QS II Splice Kits (with Silicone Lubricant) 10/25/17

________________________________________________________________________________________________________

Page 1 of 2

Safety Data Sheet

provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither

the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group:

10-5591-2

Version Number:

38.01

Issue Date:

10/25/17

Supercedes Date:

01/07/16

Product identifier

5411 Series QS II Splice Kits (with Silicone Lubricant)

ID Number(s):

80-6100-7671-5, 80-6100-7672-3, 80-6100-7673-1, 80-6100-7674-9, 80-6100-7992-5, 80-6101-3977-8, 80-6102-5394-2, 80-6102-

5397-5, 80-6102-5398-3, 80-6102-5399-1, 80-6102-5400-7, 80-6105-3047-1, 80-6105-3048-9, 80-6105-3049-7, 80-6105-3050-5, 80-

6105-9401-4, 80-6105-9402-2, 80-6105-9725-6, 80-6105-9726-4, 80-6105-9727-2, 80-6105-9728-0, 80-6105-9729-8, 80-6107-3794-

4, 80-6107-3916-3, 80-6107-3947-8, 80-6107-3948-6, 80-6108-3459-2, 80-6108-3460-0, 80-6108-3554-0, 80-6108-3555-7, 80-6108-

3556-5, 80-6108-3557-3, 80-6108-3629-0, 80-6108-3944-3, 80-6109-2182-9, 80-6109-2183-7, 80-6109-2184-5, 80-6109-7042-0, 80-

6109-7045-3, 80-6109-7046-1, 80-6109-7106-3, 80-6109-7107-1, 80-6109-7119-6, 80-6109-7120-4, 80-6109-7134-5, 80-6109-7149-

3, 80-6109-7151-9, 80-6109-8756-4, 80-6112-0729-3, 80-6112-1071-9, 80-6112-1141-0, 80-6112-1204-6, 80-6112-1581-7, 80-6112-

1582-5, 80-6112-1588-2, 80-6112-1779-7, 80-6112-3118-6, 80-6112-3661-5, 80-6112-6418-7, 80-6116-2635-1

Recommended use

Electrical, ELECTRICAL SPLICE for medium power distribution cable

Supplier's details

MANUFACTURER:

DIVISION:

Electrical Markets Division

ADDRESS:

3M Center, St. Paul, MN 55144-1000, USA

Telephone:

1-888-3M HELPS (1-888-364-3577)

Emergency telephone number

1-800-364-3577 or (651) 737-6501 (24 hours)

This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data

Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included.

Please do not separate the component documents from this cover page. The document numbers for components of this

product are:

34-7684-3, 10-2656-6

DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES NO

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF

TRADE.User is responsible for determining whether the3Mproduct is fit for a particular purpose and suitable for user's method of use

or application.Given the variety of factors that can affect the use and application of a3Mproduct, some of which are uniquely within

Summary of content (14 pages)

PAGE 1
5411 Series QS II Splice Kits (with Silicone Lubricant) 10/25/17 Safety Data Sheet Copyright,2017,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
5411 Series QS II Splice Kits (with Silicone Lubricant) 10/25/17 the user's knowledge and control,it is essential that the user evaluate the3Mproduct to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3Mprovides information in electronic form as a service to its customers.
PAGE 3
SILICONE LUBRICANT 03/19/14 Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 4
SILICONE LUBRICANT 03/19/14 Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 2.3. Hazards not otherwise classified None. SECTION 3: Composition/information on ingredients Ingredient SILICONE GREASE SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE C.A.S. No. 63148-62-9 112945-52-5 % by Wt 75 - 95 5 - 25 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air.
PAGE 5
SILICONE LUBRICANT 03/19/14 SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode.
PAGE 6
SILICONE LUBRICANT 03/19/14 Specific Physical Form: Odor, Color, Grade: Odor threshold pH Melting point Boiling Point Flash Point Evaporation rate Flammability (solid, gas) Flammable Limits(LEL) Flammable Limits(UEL) Vapor Pressure GREASE Light colored grease, no odor No Data Available Not Applicable No Data Available Not Applicable No flash point Not Applicable Not Classified No Data Available No Data Available Not Applicable Vapor Density Not Applicable Density Specific Gravity No Data Available 1.
PAGE 7
SILICONE LUBRICANT 03/19/14 Strong bases Reducing agents No Data Available 10.6. Hazardous decomposition products Substance None known. Condition Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority.
PAGE 8
SILICONE LUBRICANT 03/19/14 SILICONE GREASE SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE Rabbit Rabbit No significant irritation No significant irritation Species Rabbit Rabbit Value No significant irritation No significant irritation Species Human and animal Value Not sensitizing Species Value Serious Eye Damage/Irritation Name SILICONE GREASE SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE Skin Sensitization Name SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE Respiratory Sensi
PAGE 9
SILICONE LUBRICANT 03/19/14 SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1.
PAGE 10
SILICONE LUBRICANT 03/19/14 This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 0 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies.
PAGE 11
Black EPDM Tubing (on plastic core) ==>(LH-A100-1762-5) 06/09/17 Article Information Sheet Copyright,2017,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 12
Black EPDM Tubing (on plastic core) ==>(LH-A100-1762-5) Ingredient Black EPDM tube 06/09/17 C.A.S. No. Trade Secret* % by Wt 100 *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated. Eye Contact: No need for first aid is anticipated.
PAGE 13
Black EPDM Tubing (on plastic core) ==>(LH-A100-1762-5) 06/09/17 9.1.
PAGE 14
Black EPDM Tubing (on plastic core) ==>(LH-A100-1762-5) 06/09/17 SECTION 13: Disposal considerations Dispose of contents/container in accordance with the local/regional/national/international regulations. SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.