Certifications 2

ManualsBrands3M ManualsAdhesive TapeScotch-Seal 5313 Draught excluder Scotch Seal® 5313 Black (L x W) 35 m x 20 mm 1 pc(s)

3M™ SCOTCH-WELD™ Preformed Sealant Black 5313

__________________________________________________________________________________________

Page: 1 of 13

Safety Data Sheet

properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior

written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the

intention of earning a profit thereon.

Document group:

11-1458-6

Version number:

14.03

Revision date:

09/09/2019

Supersedes date:

03/05/2019

Transportation version number: 1.00 (12/01/2011)

This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.

SECTION 1: Identification of the substance/mixture and of the

company/undertaking

1.1. Product identifier

3M™ SCOTCH-WELD™ Preformed Sealant Black 5313

Product Identification Numbers

FS-5313-0203-2

FS-9000-0277-5

FS-9000-2019-9

FS-9000-2037-1

FS-9000-2079-3

FS-9100-0153-6

FS-9100-0290-6

7000079781

7000033721

7000033722

7000079797

7000079809

7000079808

7000079786

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Sealant.

1.3. Details of the supplier of the safety data sheet

Address:

3M United Kingdom PLC, 3M Centre, Cain Road, Bracknell, Berkshire, RG12 8HT.

Telephone:

+44 (0)1344 858 000

E Mail:

tox.uk@mmm.com

Website:

www.3M.com/uk

1.4. Emergency telephone number

+44 (0)1344 858 000

SECTION 2: Hazard identification

2.1. Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008

CLASSIFICATION:

This material is not classified as hazardous according to Regulation (EC) No. 1272/2008, as amended, on classification,

labelling, and packaging of substances and mixtures.

2.2. Label elements

CLP REGULATION (EC) No 1272/2008

Summary of content (13 pages)

PAGE 1
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Safety Data Sheet Copyright, 2019, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Not applicable SUPPLEMENTAL INFORMATION: Supplemental Hazard Statements: EUH210 Safety data sheet available on request. Notes on labelling Nota L applied to CASRN 64741-88-4. 2.3. Other hazards None known. SECTION 3: Composition/information on ingredients Ingredient CAS Nbr EC No. Butene, polymer with 2-methyl-1propene Carbon black 9044-17-1 1333-86-4 215-609-9 Kaolin 1332-58-7 310-194-1 Butyl rubber.
PAGE 3
M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Inhalation Remove person to fresh air. If you feel unwell, get medical attention. Skin contact Wash with soap and water. If signs/symptoms develop, get medical attention. Eye contact Flush with large amounts of water. medical attention. Remove contact lenses if easy to do. If swallowed Rinse mouth. Do not induce vomiting. Continue rinsing. If signs/symptoms persist, get Get immediate medical attention. 4.2.
PAGE 4
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 SECTION 7: Handling and storage 7.1. Precautions for safe handling For industrial/occupational use only. Not for consumer sale or use. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.) 7.2. Conditions for safe storage including any incompatibilities Store away from acids. Store away from oxidising agents. 7.3. Specific end use(s) See information in Section 7.
PAGE 5
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Respiratory protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. SECTION 9: Physical and chemical properties 9.1.
PAGE 6
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 10.5 Incompatible materials None known. 10.6 Hazardous decomposition products Substance None known. Condition Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not agree with the EU material classification in Section 2 and/or the ingredient classifications in Section 3 if specific ingredient classifications are mandated by a competent authority.
PAGE 7
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Titanium dioxide InhalationDust/Mist (4 hours) Ingestion Dermal Rat LC50 > 6.82 mg/l Rat LD50 > 10,000 mg/kg LD50 estimated to be > 5,000 mg/kg InhalationDust/Mist (4 hours) Ingestion Rat LC50 > 5.
PAGE 8
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Name Species Value Talc Human Not classified Name Route Value Carbon black Carbon black In Vitro In vivo Distillates (petroleum), solvent-refined heavy paraffinic In Vitro Talc Talc Resin acids and rosin acids, esters with glycerol Quartz In Vitro In vivo In Vitro In Vitro Quartz In vivo Titanium dioxide Titanium dioxide Zinc oxide In Vitro In vivo In Vitro Zinc oxide In vivo Not mutagenic Some positive data exist, but the data are not suff
PAGE 9
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 paraffinic Distillates (petroleum), solvent-refined heavy paraffinic Ingestion central nervous system depression May cause drowsiness or dizziness animal Professio nal judgeme nt NOAEL Not available Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test result Kaolin Inhalation pneumoconiosis Human NOAEL NA Kaolin Inhalation pulmonary fibrosis Causes damage to organs through prolonged or repeated exp
PAGE 10
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 No product test data available. Material CAS # Butene, polymer with 2-methyl-1-propene 9044-17-1 Organism Type Water flea Data not available or insufficient for classification Data not available or insufficient for classification Experimental 48 hours Carbon black 1333-86-4 Kaolin 1332-58-7 Butyl rubber.
PAGE 11
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Zinc oxide 1314-13-2 Estimated 96 hours 1314-13-2 Algae or other aquatic plants Crustacea other Estimated 24 days Effect 0.026 mg/l Concentration 10% NOEC 0.007 mg/l Zinc oxide Zinc oxide 1314-13-2 Rainbow trout Estimated 30 days NOEC Study Type Test result Protocol 0.049 mg/l 12.2. Persistence and degradability Material CAS Nbr Test type Butene, polymer with 2methyl-1-propene Carbon black 9044-17-1 Kaolin 1332-58-7 Butyl rubber.
PAGE 12
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 Please contact manufacturer for more details 12.5. Results of the PBT and vPvB assessment This material does not contain any substances that are assessed to be a PBT or vPvB 12.6. Other adverse effects No information available. SECTION 13: Disposal considerations 13.1 Waste treatment methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. This product has been classified as a non-hazardous waste.
PAGE 13
3M™ SCOTCH-WELD™ Preformed Sealant Black 5313 substances may have been carried out by the registrants of the substances in accordance with 1907/2006, as amended. Regulation (EC) No SECTION 16: Other information List of relevant H statements EUH066 H304 H372 H400 H410 Repeated exposure may cause skin dryness or cracking. May be fatal if swallowed and enters airways. Causes damage to organs through prolonged or repeated exposure. Very toxic to aquatic life.