SDS

3M(TM) Marine Adhesive Sealant 5200, White, PN 05203, PN 05206, PN 06500 07/25/18
__________________________________________________________________________________________
Page 6 of 11
Decomposition temperature
No Data Available
Viscosity
100,000 - 500,000 centipoise
Hazardous Air Pollutants
<=0.2 % weight [Test Method:Calculated]
Molecular weight
No Data Available
Percent volatile
2.9 % weight
VOC Less H2O & Exempt Solvents
40 g/l [Test Method:tested per EPA method 24]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Heat
10.5. Incompatible materials
Reaction with water, alcohols, and amines is not hazardous if container can vent to the atmosphere to prevent pressure
buildup.
Amines
Alcohols
Water
10.6. Hazardous decomposition products
Substance
Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.