Datasheet

Technical Data Sheet
Effective: 14/02/2022 Supersedes: 30/08/18
Page 1 of 4
Automotive Aftermarket Division
3M™ 51816/51815 Perfect-it™ Fast Cut Plus Extreme
1) Part Numbers
3M™ Perfect-it™ Fast Cut Plus Extreme PN 51816 500 g
3M™ Perfect-it™ Fast Cut Plus Extreme PN 51815 1 kg
2) Description and end uses
3M™ 51816/51815 Perfect-it™ Fast Cut Plus Extreme is an aggressive abrasive liquid
compound for use on refinish paints to remove abrasive scratches during the paint
rectification process. It can also be used to remove oxidation, scratches, car wash
scratches, etc, on original manufacturer’s paints and on the surface of vehicle headlights.
It is easy to clean up and has a longer working time than Fast Cut Plus.
Improved handling characteristics
 Use up to 30% less
 Very easy clean up
 Long working time 
 Good Finish
 Can be “seen through” to check for any remaining sanding scratches before
moving on to next step
 Low sling
 Can be use with or without water
3) Physical Properties
Container:
1
kg
/
5
00 g
bottle
Qty per box:
12 bottles
Flash point:
>100 ºC closed cup
Colour:
White
Consistency:
Thick liquid with Pine oil odour
Viscosity:
30,000
-
40,000 cps
pH:
8
-
9
% volatile:
20 % by weight
Mineral
:
Aluminium oxide