Datasheet

Page 1 of 2
Flap Disc 969F
Product Data Sheet
Date 02/2020
Supersedes: NEW
3M I.D. Number
969F
Product
Description
3M™ Cubitron™ II 969F flap discs are designed for medium to high unit pressure
applications such as beveling, slag removal, weld grinding, and heavy deburring. The
primary substrates for this product are carbon steel, stainless steel and other
nickel/chromium-based alloys.
Mineral
Blend of ceramic Precision Shaped Grain (PSG) and crushed ceramic grain
Grades
40+, 60+, 80+
Bond
Resin bonded
Backing
Hub construction
Polyester X-wt.
Fibreglass
Available Forms
Dimensions
Type 27 and Type29
115mm, 125mm, 180mm
Identification
All relevant product identification information can be found on the product
label or on the box in which the product was received or on the with the product
supplied Safety Instruction Leaflet.
Storage
Store at 16 °C – 26 °C and 35-50 % relative humidity in its original box on “first-in -
first-out” cycle.
Note: The shelf life may be shortened if the original packaging is not properly sealed
or stored in an environment with high temperatures or humidity.
Precautionary
Information
Refer to Product Label and Safety Instruction Leaflet for health and safety information
before using the product.
This product should be used on guarded tools and the fiberglass support plate should
not be trimmed as injury may result.
For information please contact your local 3M Office.
www.3M.com
For Additional
Information
To request additional product information or to arrange for sales assistance, call your
local 3M Application Engineering.