Datasheet

3M™ Industrial Cleaner Cleaner Spray
__________________________________________________________________________________________
Page: 6 of 14
Applicable Norms/Standards
Use eye/face protection conforming to EN 166
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended:
Material
Thickness (mm)
Breakthrough Time
Neoprene.
>.3
> 8 hours
Nitrile rubber.
>.3
> 8 hours
The glove data presented are based on the substance driving dermal toxicity and the conditions present at the time of testing.
Breakthrough time may be altered when the glove is subjected to use conditions that place additional stress on the glove.
Applicable Norms/Standards
Use gloves tested to EN 374
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part
of a full respiratory protection program. Based on the results of the exposure assessment, select from the following
respirator type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours
Half facepiece or full facepiece supplied-air respirator
For questions about suitability for a specific application, consult with your respirator manufacturer.
Applicable Norms/Standards
Use a respirator conforming to EN 140 or EN 136
Use a respirator conforming to EN 140 or EN 136: filter type A
8.2.3. Environmental exposure controls
Refer to Annex
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
Liquid.
Specific Physical Form:
Aerosol
Appearance/Odour
Sweet odour; clear
Odour threshold
No data available.
pH
Not applicable.
Boiling point/boiling range
< 20 ºC
Melting point
Not applicable.
Flammability (solid, gas)
Not applicable.
Explosive properties
Not classified
Oxidising properties
Not classified
Flash point
-46 ºC [Test Method:Closed Cup]
Autoignition temperature
No data available.
Flammable Limits(LEL)
No data available.
Flammable Limits(UEL)
No data available.