Datasheet

3M™ Industrial Cleaner Cleaner Spray
__________________________________________________________________________________________
Page: 13 of 14
Revision information:
Industrial Use of Cleaners: Section 16: Annex information was modified.
Professional Use of Cleaner: Section 16: Annex information was modified.
Section 1: Product identification numbers information was modified.
Section 01: SAP Material Numbers information was modified.
CLP Remark(phrase) information was modified.
Label: CLP Percent Unknown information was deleted.
Label: CLP Precautionary - General information was deleted.
Label: CLP Precautionary - Prevention information was modified.
Section 3: Composition/ Information of ingredients table information was modified.
Section 5: Fire - Advice for fire fighters information information was modified.
Section 6: Accidental release environmental information information was modified.
Section 7: Precautions safe handling information information was modified.
Section 8: Eye/face protection information information was modified.
Section 8: glove data value information was added.
Section 8: glove data value information was modified.
Section 11: Acute Toxicity table information was modified.
Section 11: Carcinogenicity Table information was modified.
Section 11: Germ Cell Mutagenicity Table information was modified.
Section 11: Reproductive Toxicity Table information was modified.
Section 11: Serious Eye Damage/Irritation Table information was modified.
Section 11: Skin Corrosion/Irritation Table information was modified.
Section 11: Skin Sensitization Table information was modified.
Section 11: Target Organs - Repeated Table information was modified.
Section 13: 13.1. Waste disposal note information was modified.
Section 13: Standard Phrase Category Waste GHS information was modified.
Annex
1. Title
Substance identification
(R)-p-mentha-1,8-diene;
EC No. 227-813-5;
CAS Nbr 5989-27-5;
Exposure Scenario Name
Industrial Use of Cleaners
Lifecycle Stage
Use at industrial sites
Contributing activities
PROC 07 -Industrial spraying
PROC 10 -Roller application or brushing
PROC 13 -Treatment of articles by dipping and pouring
ERC 04 -Use of non-reactive processing aid at industrial site (no inclusion into or
onto article)
Processes, tasks and activities covered
Application of product with a roller or brush. Application of product. Spraying of
substances/mixtures.
2. Operational conditions and risk management measures
Operating Conditions
Physical state:Liquid.
General operating conditions:
Duration of use: 8 hours/day;
Indoors with LEV and good general ventilation;
Risk management measures
Under the operational conditions described above the following risk management
measures apply:
General risk management measures:
Human health:
Provide a good standard of general ventilation (not less than 3 to 5 air changes per
hour);
Wear chemically resistant gloves (tested to EN374) in combination with ‘basic’