MSDS

ManualsBrands3M ManualsConnectorsElectrical Insulating Resin, 4N Series, 7.2 Ounce

3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007

_________________________________________________________________________________________________

Page 1 of 8

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

SCOTCHCAST BRAND RESIN #4 (PART A & B)

MANUFACTURER:

DIVISION:

Electrical Markets Division

ADDRESS:

3M Center

St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

07/23/2007

Supercedes Date:

06/27/2006

Document Group:

08-4935-6

Product Use:

Intended Use: INSULATING AND ENVIRONMENTAL SEALING OF POWER DISTRIBUTION

CABLE SPLICES

Specific Use: ELECTRICAL INSULATING RESIN

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

Part A Components listed below are % of mixed resin None Not Applicable

Epoxy Resin 25068-38-6 50 - 60

Part B Components listed below are % of mixed resin Mixture Not Applicable

NONYLPHENOL 25154-52-3 10 - 20

N-AMINOETHYLPIPERAZINE 140-31-8 3 - 7

HEAVY NAPHTHENIC DISTILLATE SOLVENT PETROLEUM EXTRACTS 64742-11-6 3 - 7

FATTY ACIDS, TALL-OIL, REACTION PRODUCTS WITH

TRIETHYLENETETRAMINE

68919-79-9 < 5

TALL-OIL FATTY ACIDS, REACTION PRODUCTS WITH TETA AND

DGEBA

Trade Secret < 5

amine/epoxy adduct 164907-80-6 < 3

AROMATIC HYDROCARBONS, C12-20 70955-17-8 < 2

TRIS(2,4,6-DIMETHYLAMINOMONOMETHYL)PHENOL 90-72-2 < 2

TRIETHYLENETETRAMINE 112-24-3 0.1 - 1

DIETHYLENETRIAMINE 111-40-0 < 0.1

CARBON BLACK 1333-86-4 < 0.1

Minute quantities of the substances listed below may be emitted during Normal Use:

Substance Condition

Summary of content (8 pages)

PAGE 1
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 Material Safety Data Sheet Copyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) Amine Compounds Hydrocarbons Irritant Vapors or Gases Toxic Vapor, Gas, Particulate 07/23/2007 Normal Use Normal Use Normal Use Normal Use trade secret component above is on TSCA confidential Inventory SECTION 3: HAZARDS IDENTIFICATION 3.
PAGE 3
M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Contains a chemical or chemicals which can cause birth defects or other reproductive harm. Carcinogenicity: Contains a chemical or chemicals which can cause cancer. Ingredient CARBON BLACK CARBON BLACK EXTRACTS C.A.S. No.
PAGE 4
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 information. SECTION 6: ACCIDENTAL RELEASE MEASURES Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air.
PAGE 5
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Neoprene. The following protective clothing material(s) are recommended: Apron - Neoprene.
PAGE 6
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 Melting point No Data Available Solubility in Water Evaporation rate Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents Viscosity Negligible No Data Available No Data Available 3-5% No Data Available 3500 - 5000 centipoise [@ 73.4000000000 ºF] [Details: MITS data] SECTION 10: STABILITY AND REACTIVITY Stability: Stable.
PAGE 7
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 SECTION 14:TRANSPORT INFORMATION ID Number(s): 78-8111-0945-9, 78-8111-0947-5, 78-8111-0948-3, 78-8111-0949-1, 78-8111-0950-9, 78-8111-0951-7, 80-6109-7349-9, 806109-8166-6, 80-6109-8167-4, 80-6109-8168-2, 80-6109-8169-0, 80-6109-8170-8, 80-6109-8171-6, 80-6109-8241-7, 80-61098242-5, 80-6112-1861-3, 80-6112-1862-1, 80-6112-1863-9, 80-6112-1864-7, 80-6112-1866-2, 80-6112-1867-0, 80-6112-1868-8 Please contact the emergency numb
PAGE 8
3M MATERIAL SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B) 07/23/2007 Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.