Datasheet

3M
™
Protective Coverall 4545
Test
Standard/test
method
Class/result
Abrasion resistance
(visual assessment)
EN 530:2010 Class 1
Flex cracking
(visual assessment)
ISO 7854:1995 Class 6
Tear resistance ISO 9073-4 :1997 Class 1
Tensile strength EN ISO 13934-1:1999 Class 1
Puncture resistance EN 863:1995 Class 1
Seam strength EN ISO 13935-2:1999 Class 2
Repellency
toliquids –
30%H
2
SO
4
EN ISO 6530:2005 Class 3 of 3
Liquid penetration
resistance –
30%H
2
SO
4
EN ISO 6530:2005 Class 3 of 3
Repellency
toliquids –
10%NaOH
EN ISO 6530:2005 Class 3 of 3
Liquid penetration
resistance –
10%NaOH
EN ISO 6530:2005 Class 3 of 3
Test
Standard/test
method
Class/result
Anti-static coating
on inner surface
EN 1149-1:2006 Pass
Radioactive
particulates (TIL)
EN 1073-2:2002 Class 1 of 3
Synthetic blood
resistance
ISO 16603:2004 Pass 20kPa
Blood borne
pathogen
penetration
resistance
ISO 16604:2004 Class 1
Contaminated solid
particle penetration
resistance
ISO 22612:2005 Class 3 of 3
Contaminated
liquid aerosol
penetration
resistance
ISO/DIS 22611:2003 Class 3 of 3
Wet bacteria
penetration
resistance
EN ISO 22610:2006 Class 6
The table below shows the performance of this product when
tested under laboratory conditions in accordance with the
referenced standard test method.
Note: The maximum Class is 6 unless otherwise noted.
Personal Safety Division
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
www.3M.eu/safety
Printed in the UK. Please recycle. 3M is a trademark
of 3M Company. © 3M 2019. All rights reserved.
Version: J460467-2
IMPORTANT NOTICE
The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a
competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected
application. All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other
products or environment. Any action or usage of this product made in violation of this document is at the risk of the user. Compliance to the information and
specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules,
procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M
group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to
its decision and control. Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause,
excluding any other warranty or compensation.
Visit the 3M Chemical Test Library for
anonline repository of available chemical
data for 3M
™
Protective Coveralls:
http://go.3M.com/CHTL