Brochure
Product Guide
(continued)
For applications conducted in a controlled
environment refer to "Cleanroom Applications".
Material will melt when contacting spatter
and hot surfaces.
Refer to pesticide manufacturer's recommendations
for appropriate level of liquid/particulate protection.
** See pages 4-5 for additional overview
and technical data sheets at 3M.com/
protectiveapparel for fuller specifications.
Please recycle. Printed in USA.
© 3M 2016. All rights reserved.
Issued: 9/16 11683HB
70-0716-7207-8
Personal Safety Division
3M Center, Building 235-2NW-70
St. Paul, MN 55144-1000
3M PSD products are for occupational use only
3
Important Notice
This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective
clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be
observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE will depend on the particular situation
Final determination as to the suitability of these products for a particular situation is the employer’s responsibility. This
information is subject to revision at any time. Always read and follow all User Instructions supplied with your
3M
™
Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service.
LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether
direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M PSD products,
or the user’s inability to use such products. THESE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE.
WARRANTY: 3M will replace or refund the purchase price of any Personal Safety Division product found to be defective in
material, manufacture, or not in conformance with any expressed warranty. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU
OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Click on photos
to view web
content.
4510 4515 4520 4530 4535 4540+ 4545 4565 4570
Cleaning and maintenance
Dirt
● ● ●
Machine or vehicle
maintenance
● ● ● ● ● ● ●
Light duty building
maintenance
● ● ●
Grease (general)
● ● ● ● ● ● ●
Light duty
warehousing, janitorial
●
General industry
Electronics/circuit
board assembly
● ●
Fiberglass/cellulose
insulation installation
● ● ● ● ● ● ● ●
Food processing
● ● ● ● ● ●
General powder
handling
● ● ● ● ● ● ●
Lime handling
● ● ●
● ●
Non-hazardous
aerosols (sprays)
● ● ● ● ● ● ● ●
Non-hazardous liquids
● ● ● ● ● ● ● ●
Non-hazardous solids
● ●
Coal dust
● ● ● ● ● ● ● ●
Oil & gas/chemical
Maintenance (refinery)
●
● ●
Chemical mixing
and handling
● ●
Metal work
Metal grinding
●
Welding in certain
applications (worn
over appropriate
welding garment)
●
Summary: Materials and design
Color options
White White, blue White Blue
White with
White with
blue triangle
White
White with red
taped seams
Grey
Suit material
PE laminate SMS SMMMS SMMS
PE laminate
+ SMMMS
BICO PE
laminate
+ SMMMS
BICO PE
laminate
BICO PE
laminate
Multi-layer
PE laminate
Fabric weight
47 gsm 50 gsm 43 gsm 54 gsm 55 gsm 49 gsm 49 gsm 49 gsm 92 gsm
Coating
Anti-static None Anti-static Anti-static, FR Anti-static Anti-static Anti-static Anti-static Anti-static
Storm flap
Basic flap
Storm flap
with tabs
Storm flap
with tabs
Sealable
flap
Basic flap
Sealable
flap
Sealable
flap
Sealable
flap
Double flap,
double zip
Cuffs
Elastic Elastic Knitted Knitted Knitted Knitted Knitted Knitted
Elastic +
thumb loops
Reinforced gusset
No No No Yes Yes Yes Yes No No
Hood design
2-panel 2-panel 3-panel 3-panel 2-panel 3-panel 3-panel 3-panel 3-panel
Seams type
Stitched &
partially bound
Stitched Stitched Stitched
Stitched &
partially bound
Stitched &
partially bound
Stitched &
partially bound
Taped Taped