Datasheet

451045104510
3M
TM
4510 Protective Coverall
The 3M™ Protective Coverall 4510 is designed to help protect against
hazardous dusts (Type 5) and light liquid splashes (Type 6).
Key Features
• Helps provide basic protection against dusts and light liquid splashes
• Elasticated waist, ankles, and wrists for convenience and freedom of
movement
• Two-way zipper with storm fl ap for convenience and additional protection
• Low-linting properties and anti-static treatment on both sides*
Comfort and Protection
Liquid
Protection
Type 6 - Light Liquid Splashes
(EN 13034:2005 + A1:2009)
Dust
Protection
Type 5 - Solid Airborne Particulates
EN ISO 13982-1:2004
Anti-static
Anti-static coating* on both sides
(EN 1149-5:2008)
Nuclear
Radioactive particulates
(EN 1073-2:2002) Class 1
Except EN863 puncture resistance. Does not off er protection against radiation.
* All apparel must be suitably grounded for anti-static treatment to be eff ective.
Approvals
CE approved under PPE Directive (89/686/ECC), Category III
Article 10 Certifi cation: BTTG Testing & Certifi cation Ltd.
Notifi ed Body Number: 0338
Article 11B Supervision: SGS United Kingdom Ltd.
Notifi ed Body Number: 0120
Materials
Suit Polypropylene / Polyethylene Laminate Film
Zipper Nylon on Polyester Braid
Elastic Neoprene Rubber
Thread Polyester / Cotton
This product does not contain components made from silicone or natural rubber latex.
Storage and Disposal
• Store in dry, clean conditions in original packaging, away from direct
sunlight, sources of high temperature, and solvent vapours
• Store within the temperature range -20°C to +25°C (-4°F to +68°F) and
with relative humidity below 80%
• Expected shelf life is three years from date of manufacture when stored
as stated
• Replace garments if damaged, heavily contaminated or in accordance
with local work practice or regulations
• Handle and dispose of contaminated garments with care and in
accordance with applicable regulations
Limited use
Do not wash Do not dry clean
Do not bleach
Flammable – keep away
from sparks or fl ames
Do not iron Single use – do not re-use
Do not
tumble dry
Warnings and Limitations
Before use read and understand all user instructions and be sure that
the product is suitable for the application and fi tted correctly. Product
must never be altered or modifi ed.
Do not use for:
• Contact with heavy oils, sparks or fl ame, or combustible liquids;
• Exposure situations resulting in spray or liquid build-up on the suit;
• Environments with high mechanical risks (abrasions, tears, cuts);
• Contact with hazardous substances beyond Type 5/6 certifi cation;
• Environments with conditions of excessive heat.
The Power to Protect Your World
SM
Technical
Data Sheet
Height
Chest
64 – 67 in 164 – 170 cm 33 – 36 in 84 – 92 cm
66 – 69 in 167 – 176 cm 36 – 39 in 92 – 100 cm
69 – 71 in 174 – 181 cm 39 – 43 in 100 – 108 cm
70 – 74 in 179 – 187 cm 43 – 45 in 108 – 115 cm
73 – 76 in 186 – 194 cm 45 – 49 in 115 – 124 cm
76 – 78 in 194 – 200 cm 49 – 52 in 124 – 132 cm
78 – 81 in 200 – 206 cm 52 – 55 in 132 – 140 cm
Sizing
An appropriate size garment should be selected to allow suffi cient
movement for the task whilst maintaining a secure fi t.
Height
Chest