Datasheet
3M™ Overboot 450
Technical Data Sheet
Description
3M™ Overboot 450 are designed to help protect the
wearer’s footwear from non-hazardous liquid splashes and
dusts. They may also help reduce contamination of the
working environment.
This product does not contain components made from
silicone or natural rubber latex.
1
This material is also used in the front panel of the 3M™ Protective Coverall
4535
2
The values above are the result of illustrative lab test measures and should not
be considered as a commitment from 3M
Materials
Overboot material
Polypropylene + Polyethylene
Laminate 60gsm
1
Ties
Polypropylene + Polyethylene
Laminate 60gsm
Sole PVC
Elastic Synthetic Rubber (non-latex)
Thread Polyester/ Cotton
Sizing
2
Appropriately sized apparel should be selected to allow
sucient movement for the task whilst maintaining a secure
t.
Ties on boots measure
11.8” / 30cm long each
(23.6” / 60cm length total).
Boot elastication measures
9" / 23cm when stretched.
Boot width approx
5" / 12.5cm wide.
Elastic opening (stretched) 9" / 23cm
Back Height
14" / 35.5cm
Total length
11.5" / 29cm
Storage and Disposal
• Store in dry, clean conditions in original packaging, away
from direct sunlight, sources of high temperature, and
solvent vapours
• Store within the temperature range -20°C to +25°C (-4°F
to +77°F) and with relative humidity below 80%
• Expected shelf life is three years from date of manufacture
when stored as stated
3
• Replace apparel if damaged, heavily contaminated or in
accordance with local work practice or regulations
• Handle and dispose of contaminated garments with care
and in accordance with applicable regulations
3
The shelf life as dened above remains an indicative and maximum data,
subject to many external and non-controllable factors. It may never be
interpreted as a warranty.
Limited Use
Warnings and Limitations
Before use read and understand all information for use and be
sure that the product is suitable for the application and tted
correctly. Product must never be altered or modied.
Do not use for:
• Contact with heavy oils, sparks or ame, or combustible
liquids;
• Environments with high mechanical risks (abrasions, tears,
cuts);
• Contact with hazardous substances;
• Environments with conditions of excessive heat.
Do not wash Do not dry clean
Do not bleach
Flammable — keep away
from sparks or ames
Do not iron
Single Use - do not
re-use
Do not tumble
dry


