Datasheet

Fit Check

Performapositivepressuretcheckeachtimetherespiratoris

donned.

PositivepressureFaceFitcheck

Fitting instructions must be followed each time the respirator is

worn.

1. Placethepalmofthehandovertheexhalationvalvecoverand

exhalegently.

2. Iftherespiratorbulgesslightlyandnoairleakagebetween

the face and the respirator is detected, a proper ﬁt has been

achieved.

3. If air leakage is detected, re-position the respirator on the

faceand/orreadjustthetensionofthestraptoeliminatethe

leakage.

4. Repeat the above face ﬁt check

5. Ifyoucannotachieveapropert,donotenterthe

contaminated area. See your supervisor

Important Notice

3M does not accept liability of any kind, be it direct or

consequential(including,butnotlimitedto,lossofprofits,

businessand/orgoodwill)arisingfromrelianceuponany

information herein provided by 3M. The user is responsible for

determining the suitability of the products for their intended

use.Nothinginthisstatementwillbedeemedtoexcludeor

restrict3M’sliabilityfordeathorpersonalinjuryarisingfromits

negligence.

EU_Master_01

3M is a trademark of 3M company.

Allrightsreserved.

16755

3M Personal Safety Division

EMEA Region

3MCentre,

CainRoad,Bracknell

BerkshireRG128HT

UnitedKingdom

Tel:+44(0)1344858000