Certifications 2

3M™ Single and Double Coated Foam Tapes (4004, 4008, 4016, 4026, 4032, 4052, 4056, 4085, 4104, 4108, 4116) 12/11/14

__________________________________________________________________________________________

Page 1 of 5

Article Information Sheet

allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from

3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

This Article Information Sheet is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not

been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health

Administration’s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: “Article”

means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during

manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and

(iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a

hazardous chemical, and does not pose a physical or health risk to employees.

Document Group:

25-6311-2

Version Number:

2.00

Issue Date:

12/11/14

Supercedes Date:

Initial Issue

SECTION 1: Identification

1.1. Product identifier

3M™ Single and Double Coated Foam Tapes (4004, 4008, 4016, 4026, 4032, 4052, 4056, 4085, 4104, 4108, 4116)

1.2. Recommended use and restrictions on use

Recommended use

Attachment/Reinforcement & Sound Damping, Tape

1.3. Supplier’s details

MANUFACTURER:

DIVISION:

Industrial Adhesives and Tapes Division

ADDRESS:

3M Center, St. Paul, MN 55144-1000, USA

Telephone:

1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number

1-800-364-3577 or (651) 737-6501 (24 hours)

3M™ Urethane Foam Tapes 4104, 4108 and 4116

3M™ Double Coated Urethane Foam Tapes 4004, 4008, 4016, 4026, 4032 and 4085

3M™ Double Coated Black Urethane Foam Tapes 4052 and 4056

3M™ Damping Aluminum Foam Sheets 4014

SECTION 2: Hazard identification

This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 3: Composition/information on ingredients

Ingredient C.A.S. No. % by Wt

PAGE 2
3M™ Single and Double Coated Foam Tapes (4004, 4008, 4016, 4026, 4032, 4052, 4056, 4085, 4104, 4108, 4116) 12/11/14 Urethane Foam Backing Acrylic Adhesive Trade Secret* Trade Secret* 51 - 100 1 - 49 *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated.
PAGE 3
M™ Single and Double Coated Foam Tapes (4004, 4008, 4016, 4026, 4032, 4052, 4056, 4085, 4104, 4108, 4116) 12/11/14 9.1.
PAGE 4
3M™ Single and Double Coated Foam Tapes (4004, 4008, 4016, 4026, 4032, 4052, 4056, 4085, 4104, 4108, 4116) 12/11/14 insignificant environmental impact. SECTION 13: Disposal considerations Dispose of contents/container in accordance with the local/regional/national/international regulations. SECTION 14: Transport Information Not regulated per U.S. DOT, IATA or IMO. These transportation classifications are provided as a customer service.
PAGE 5
3M™ Single and Double Coated Foam Tapes (4004, 4008, 4016, 4026, 4032, 4052, 4056, 4085, 4104, 4108, 4116) 12/11/14 3M USA AISs are available at www.3M.