SDS

3M Headliner & Fabric Adhesive PN 38808 05/09/16
__________________________________________________________________________________________
Page 1 of 13
Safety Data Sheet
Copyright,2016,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group:
27-9084-8
Version Number:
4.00
Issue Date:
05/09/16
Supercedes Date:
04/01/15
SECTION 1: Identification
1.1. Product identifier
3M Headliner & Fabric Adhesive PN 38808
Product Identification Numbers
60-4550-5177-5, 60-4550-5569-3
1.2. Recommended use and restrictions on use
Recommended use
Automotive, Automotive trim, headliner and fabric adhesive., High strength adhesive for bonding automotive materials
(carpeting, fabrics, plastics) to metal and other surfaces.
Restrictions on use
Not recommended for bonding polystyrene foam.
1.3. Suppliers details
MANUFACTURER:
3M
DIVISION:
Automotive Aftermarket
ADDRESS:
3M Center, St. Paul, MN 55144-1000, USA
Telephone:
1-888-3M HELPS (1-888-364-3577)
1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
SECTION 2: Hazard identification
The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200.
This information may be different from the actual product label information for labels regulated by other agencies.
2.1. Hazard classification
Flammable Aerosol: Category 2.
Gas Under Pressure: Liquefied gas.
Serious Eye Damage/Irritation: Category 2B.
Simple Asphyxiant.
Specific Target Organ Toxicity (single exposure): Category 1.
Specific Target Organ Toxicity (single exposure): Category 3.
Specific Target Organ Toxicity (single exposure): Category 3.

Summary of content (13 pages)