Brochure

9726
9764
9777
9782
9916
9913
9917
9727
9929
9946
9785
9725
9922
9940
9921
9
Lightweight, easy-to-use units... 3M’s innovative melt-on-demand or progressive feed technology.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
(1) Weight shown is for applicator only — does not include adhesive capacity. (2) Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow.
(3) Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value.
A
G
B
C
H
D
E
F
3M
™
Scotch-Weld
™
Weight
(1)
Output
(2)
Temperature
(3)
Power Adhesive Features Warranty
Hot Melt Applicators lb/hr (120V) dia. x length, (Months)
inches
LT 10.0 oz. 2.6 265°F (129°C) 150W 5/8 x 2 TC For use with 12
low melt adhesives
LT with Quadrack 13.8 oz. 2.6 265°F (129°C) 150W 5/8 x 8 Q
Converter
Pneumatic PG II LT 4.3 lbs. 6.0 265°F (129°C) 500W 1 x 3 PG Pneumatic high output 12
with Speedloader for low melt adhesives
AE II LT 20.0 oz. 4.0 265°F (129°C) 100W 1/2 x 12 AE All electric operation for 6
low melt adhesives
TC 10.0 oz. 3.5 385°F (196°C) 150W 5/8 x 2 TC Easy to use with 12
standard melt adhesives
TC with Quadrack 13.8 oz. 3.5 385°F (196°C) 150W 5/8 x 8 Q 12
Converter
Pneumatic PG II 4.3 lbs. 7.5 385°F (196°C) 500W 1 x 3 PG Pneumatic high output for 12
with Speedloader standard melt adhesives
AE II 20.0 oz. 4.0 400°F (204°C) 100W 1/2 x 12 AE All electric operation 6
for standard melt adhesives
EC 24.0 oz. 5.5 260°F-450°F 350W 5/8 x 8 Q Temperature modules to 12
(127°-232°C)
operate with standard
and low melt adhesives
H
Accessories to improve your productivity
Increase loading capacity and
ease of operation with Quadrack
Converter and Palm Trigger.
Heavy-Duty Benchstands
provide added convenience.
Foot pedal, magazine feeder, and
benchmount accessories can provide
high capacity, hands-free operation for
3M
™
Scotch-Weld
™
PG II and
3M
™
Scotch-Weld
™
PG II LT.
Magazine Feeder
Benchmount
Foot Pedal
Tip No. Description
9726
"T" Tip (shown with valve and adapter) for all 3M
™
Applicators
9764 3/4" Slotted Spreader (3755LM adhesive only)
9777 1/4" Slotted Spreader (3755LM adhesive only)
9782 1/2" Slotted Spreader (3755LM adhesive only)
9727
"L" Tip (shown with adapter and valve) for all 3M
™
Applicators
9916 3 Hole Spreader
9913 2 Hole Spreader (1/4" hole span)
9917 3 Hole 1" Spreader for
3M
™
Applicator II only
9929 High Viscosity Valve (TC, EC, PG-II)
9946 .072" Brass Extension for
3M
™
Applicators PG II and PG II LT only
9785
.070" Tapered Aluminum Extension for all 3M
™
Applicators
9725 Mini Extension Tip .072" Opening for all 3M
™
Applicators
9922 .063" Fluted Tip
9940 .125" Fluted Tip
9921 .090" Fluted Tip
A general purpose tip (.090) is supplied with
each 3M
™
Scotch-Weld
™
Applicator. To increase
productivity, optional tips can provide multiple
beads, flat ribbons, guided beads for
carton sealing, and extended reach.
Bench nozzle assembly
Low Melt Applicators
Hot Melt Applicators
Variable
36
37
38
39
42
40 41
43