Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Introduction 3 Section 1: Introduction About this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A 4 Introduction Class II equipment Authorized Representative in the European Community CAUTION: Recycle to avoid environmental contamination This product contains recyclable parts. For information on recycling - please contact your nearest 3M Service Center for advice.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Introduction 5 WARNINGS 1. To reduce the risks associated with access to critical patient information or equipment: • 2. The SpotOn control unit is to be attached to other equipment by authorized service personnel only. • Do not re-install or re-locate the SpotOn control unit.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A 6 Introduction CAUTIONS 1. To reduce the risks associated with skin maceration: 2. • Do not use the sensor on damaged or compromised skin. To reduce the risks associated with cross-contamination: 3. • Clean the sensor cable before connecting to a new sensor.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Overview and Operation 7 Section 2: Overview and Operation Description of the SpotOn temperature monitoring system.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How does it work?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. 8 www.spotontemperature.com reorder #202052A Overview and Operation How does it work? The SpotOn temperature monitoring system uses zero-heat-flux thermometry to accurately measure a person’s core temperature as characterized in Figure 3 below. 1) The SpotOn temperature monitoring system gently warms the sensor creating an isothermal zone under the sensor.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Overview and Operation 9 Back of Control Unit To view information and connections on the back of the control unit, assure that controller is viewed from a distance no further than 15” (38 cm) from the operator.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. 10 www.spotontemperature.com reorder #202052A Overview and Operation Instructions for use 1. Ensure the SpotOn system power supply is connected to the back of the control unit and the power supply is plugged into an appropriate outlet.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Overview and Operation 11 6. Gently press the edge of the sensor to ensure good adhesion with the skin. OPTIONAL: Support the SpotOn temperature sensor cable with the provided sensor cable clip. 7.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. 12 www.spotontemperature.com reorder #202052A Overview and Operation To change temperature unit display (Celsius or Fahrenheit) The SpotOn control unit can display temperature measurements in either Celsius or Fahrenheit. The unit will be factory preset to Celsius. 1. Plug the SpotOn control unit into an appropriate outlet. 2.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Display Panel 13 Section 3: Display Panel Display screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Start-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A 14 Display Panel Ready The ready screen displays the serial number of the SpotOn sensor and indicates the SpotOn sensor cable and sensor are properly attached to the SpotOn control unit. The SpotOn sensor is now ready to be attached to the patient.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Troubleshooting 15 Section 4: Troubleshooting On Mode.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Displays.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A 16 Troubleshooting Errors Error Screen Condition Cause Action E-1 through E-16, E-18 through E-99 Sensor not properly connected to the sensor cable. Make sure the sensor is connected to the sensor cable. Sensor failure. Replace sensor. Cable failure. • Replace sensor cable. • Contact 3M Patient Warming technical service.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A General Maintenance 17 Section 5: General Maintenance, Storage and Service Cleaning and Disinfecting Procedure.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Storage.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. 18 English 202052A www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Technical Service and Order Placement 19 Section 6: Technical Service and Order Placement When you call for technical support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Technical service and order placement.. . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. 20 English 202052A www.spotontemperature.
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A Specifications 21 Section 7: Specifications Physical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the 3M TM SpotOnTM Temperature Monitoring System website to ensure you have the most recent version of this document. www.spotontemperature.com reorder #202052A 22 Specifications Electrical characteristics Environmental conditions External power supply Ambient temperature range 100-240 VAC, 50-60 Hz Output; 5 VDC Class II, double insulated medical grade Maximum heating power 2W Temperature characteristics Over-temperature cutoff 43°C - Skin thermistor reading 44.
Made in the USA by 3M Health Care. 3M is a trademark of 3M Company, used under license in Canada. SPOTON is a trademark of Arizant Healthcare Inc., used under license in Canada. ©2013 Arizant Healthcare Inc. All rights reserved. 3M Deutschland GmbH, Health Care Business Carl-Schurz-Str. 1, 41453 Neuss, Germany 3M Health Care, 2510 Conway Ave., St. Paul, MN 55144 USA TEL 800-228-3957 | www.spotontemperature.
