Datasheet

ManualsBrands3M ManualsCable & WireRibbon Cable 26x 0.08mm² Unscreened

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

™

Round Conductor Flat Cable

.050" 28 AWG Stranded, FEP 3601 Series

• FEP insulation is compatible with most insulation

displacement connectors

• .050 inch pitch parallel conductors for mass

termination

• Low dielectric constant

• Excellent abrasion and chemical resistance

• Excellent mechanical durability

• Nonammable

• UL Recognized to 200°C

• See the Regulatory Information Appendix

(RIA) in the “RoHS compliance” section of

www.3Mconnectors.com for compliance

information (RIA E1 & C1 apply)

Date Modied: October 30, 2013 TS-0553-C

Sheet 1 of 3

Physical

Insulation:

Material: Flourinated Ethylene Propylene (FEP)

Color: Blue

Marking:

Standard: None

Conductors: 28 AWG, 7 × 36 AWG [ 7 × Ø 0.127 ] Silver Plated Stranded Copper

Electrical

Voltage Rating: USA: 300V EU: <50V

Insulation Resistance: > 1 × 10

Ω/10 ft. [ 3 m ]

Characteristic Impedance:

Unbalanced

131 Ω

Capacitance: 9.9 pF/ft [ 32.5 pF/m ]

Inductance: 0.17 μH/ft [ 0.56 μH/m ]

Propagation Delay: 1.29 ns/ft [ 4.23 ns/m ]

Velocity of Propagation: 79%

Note: Unbalanced is measured between ground-signal-ground conductors.

Environmental

Temperature Rating: -55°C to +200°C

Flammability Rating: USA: VW-1

UL File No.: E42769, Style No: 20424

Summary of content (3 pages)

PAGE 1
3M™ Round Conductor Flat Cable .050" 28 AWG Stranded, FEP 3601 Series • FEP insulation is compatible with most insulation displacement connectors • .050 inch pitch parallel conductors for mass termination • Low dielectric constant • Excellent abrasion and chemical resistance • Excellent mechanical durability • Nonflammable • UL Recognized to 200°C • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.
PAGE 2
3M™ Round Conductor Flat Cable .050" 28 AWG Stranded, FEP 3601 Series Number of Conductors 3M Part Number Dimension A Dimension B 04 3601/04 0.200 ± .008 [5.08] 0.150 ± .007 [3.81] 06 3601/06 0.300 ± .008 [7.62] 0.250 ± .007 [6.35] 08 3601/08 0.400 ± .008 [10.16] 0.350 ± .007 [8.89] 10 3601/10 0.500 ± .010 [12.70] 0.450 ± .007 [11.43] 12 3601/12 0.600 ± .010 [15.24] 0.550 ± .007 [13.97] 14 3601/14 0.700 ± .010 [17.78] 0.650 ± .007 [16.51] 15 3601/15 0.750 ± .010 [19.05] 0.
PAGE 3
Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.