MSDS

3M™ Cable Preparation Kit CC-2 (Can) 04/24/15
__________________________________________________________________________________________
Page 5 of 10
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
General Physical Form:
Solid (Lint-free cloths soaked with liquid)
Specific Physical Form:
Cloth pads soaked in liquid in can or bag
Odor, Color, Grade:
citrus-like odor
Odor threshold
No Data Available
pH
7.0
Melting point
No Data Available
Boiling Point
380 ºF - 480 ºF
Flash Point
144 ºF [Test Method: Closed Cup]
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Classified
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
No Data Available
Vapor Pressure
< 1 mmHg [@ 25 ºC]
Vapor Density
> 1 [Ref Std: AIR=1]
Specific Gravity
0.76 [Ref Std: WATER=1]
Solubility in Water
Nil
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
1.5 centipoise
Volatile Organic Compounds
Approximately 740 g/l
VOC Less H2O & Exempt Solvents
760 g/l
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Sparks and/or flames
10.5. Incompatible materials
Strong oxidizing agents
10.6. Hazardous decomposition products
Substance Condition
Carbon monoxide Not Specified