Specification Sheet

Description
• Easy to operate and maintain.
• Slim design on helmet.
• Is suitable for most welding applications up to Shade 12 in the dark state.
• Has permanent protection (Shade 12 equivalent) against harmful UV- and IR- radiation,
regardless of whether the filter is in the light or dark state or whether the auto-darkening
function is operational.
• Exhaust vent to help reduce heat, humidity, and fogging.
• Has excellent visibility in light state, shade 3, for easy welding preparation and after
treatment.
• Multiple adjustments for highest comfort on helmet and headband.
• Can be used in conjunction with many reusable and maintenance-free respirators for
welding.
Common Applications
When used with recommended filters, are designed for most welding processes such as:
• MMA
• MIG/MAG
•TIG
• Plasma welding
IMPORTANT NOTE
i
Always wear ANSI approved safety spectacles as primary eye protection. Welding helmets are considered secondary
eye protection.
Approvals/Standards
•ANSI Z87.1
• ANSI Z89.1 (when used with a hard hat)
•CSA Z94.3
Equipment Markings
Additional Markings
Shall be disposed of as electrical and electronic waste
Read the instructions before use
3M™ Speedglas™ Welding Helmet 9002NC
Technical Specification
Release 1, January 2018