3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 Safety Data Sheet Copyright,2018,3M Company. All rights reserved.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 Symbols Flame | Health Hazard | Pictograms Hazard Statements Flammable liquid and vapor. Causes eye irritation. Suspected of causing cancer.
M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 Storage: Store in a well-ventilated place. Store locked up. 02/21/18 Keep cool. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 Closed containers exposed to heat from fire may build pressure and explode. Hazardous Decomposition or By-Products Substance Hydrocarbons Carbon monoxide Carbon dioxide Toxic Vapor, Gas, Particulate Condition During Combustion During Combustion During Combustion During Combustion 5.3.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Styrene Monomer 100-42-5 ACGIH TWA:20 ppm;STEL:40 ppm A4: Not class.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 Select and use eye/face protection to prevent contact based on the results of an exposure assessment. protection(s) are recommended: Indirect Vented Goggles 02/21/18 The following eye/face Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Heat Sparks and/or flames 10.5.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 May cause additional health effects (see below). Additional Health Effects: Single exposure may cause target organ effects: Auditory Effects: Signs/symptoms may include hearing impairment, balance dysfunction and ringing in the ears. Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice.
3M™ Bondo Glass Reinforced Filler, P.N.
3M™ Bondo Glass Reinforced Filler, P.N.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Styrene Monomer Inhalation auditory system Causes damage to organs LOAEL 4.
3M™ Bondo Glass Reinforced Filler, P.N.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 Flammable (gases, aerosols, liquids, or solids) Health Hazards Carcinogenicity Serious eye damage or eye irritation Specific target organ toxicity (single or repeated exposure) Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No Styrene Monomer % by Wt 100-42-5 Trade Secret 10 - 30 15.2.
3M™ Bondo Glass Reinforced Filler, P.N. 270, 271, 272, 272C, 272E, 272ES, 272K, 272T, 272W, 274, 274C, 277 02/21/18 whether it is fit for a particular purpose and suitable for user's method of use or application. 3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its completeness or accuracy.
Cream Hardener (Red, White & Blue) 02/21/14 Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Cream Hardener (Red, White & Blue) 02/21/14 2.1. Hazard classification Organic Peroxide: Type E. Serious Eye Damage/Irritation: Category 2A. Skin Sensitizer: Category 1. 2.2. Label elements Signal word Warning Symbols Flame | Exclamation mark | Pictograms Hazard Statements Heating may cause a fire. Causes serious eye irritation. May cause an allergic skin reaction. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces.
Cream Hardener (Red, White & Blue) 02/21/14 Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician: Not applicable 2.3. Hazards not otherwise classified None. 6% of the mixture consists of ingredients of unknown acute dermal toxicity. 14% of the mixture consists of ingredients of unknown acute inhalation toxicity.
Cream Hardener (Red, White & Blue) 02/21/14 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode.
Cream Hardener (Red, White & Blue) 02/21/14 Keep container tightly closed. Protect from sunlight. Store away from heat. Store at temperatures not exceeding 32C/90F. Keep cool. Keep only in original container. Store away from other materials. Keep/store away from clothing and other combustible materials. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits Ingredient Iron Oxide (FE2O3) Iron Oxide (FE2O3) CYANIDES Zinc Stearate C.A.S. No.
Cream Hardener (Red, White & Blue) 02/21/14 Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Cream Hardener (Red, White & Blue) 02/21/14 Solubility in Water Solubility- non-water Negligible No Data Available Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents No Data Available No Data Available No Data Available No Data Available 0 % weight [Test Method: Calculated] 0 lb/gal [Test Method: calcu
Cream Hardener (Red, White & Blue) 02/21/14 classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1.
Cream Hardener (Red, White & Blue) 02/21/14 Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.
Cream Hardener (Red, White & Blue) 02/21/14 Name Benzoyl Peroxide Iron Oxide (FE2O3) Species Human and animal Human Value Sensitizing Species Value Some positive data exist, but the data are not sufficient for classification Respiratory Sensitization Name Germ Cell Mutagenicity Name Benzoyl Peroxide Benzoyl Peroxide Iron Oxide (FE2O3) Route In Vitro In vivo In Vitro Value Not mutagenic Not mutagenic Not mutagenic Carcinogenicity Name Benzoyl Peroxide Route Ingestion Benzoyl Peroxide Dermal
Cream Hardener (Red, White & Blue) 02/21/14 Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Oxirane, Polymer with Methyloxirane, Monobutyl Ether Ingestion nervous system Some positive data exist, but the data are not sufficient for classification Rat NOAEL Not available Exposure Duration Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Oxirane, Polymer with Methyloxirane, Monobut
Cream Hardener (Red, White & Blue) 02/21/14 SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Incinerate uncured product in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes.
Cream Hardener (Red, White & Blue) 02/21/14 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Cream Hardener (Red, White & Blue) 02/21/14 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application.