MSDS

ManualsBrands3M ManualsPaint1-gal. Lightweight Body Filler

MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 262, 262C, 262ES, 262T, 262W, 265, 265C,

265ES, 265L, 265W, 267, 267C 09/22/09

_________________________________________________________________________________________________________

Page 1 of 2

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

PRODUCT NAME:

3M™ Bondo Lightweight Body Filler 261, 261C, 262, 262C, 262ES, 262T,

262W, 265, 265C, 265ES, 265L, 265W, 267, 267C

MANUFACTURER:

DIVISION:

Automotive Aftermarket

ADDRESS:

3M Center

St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

09/22/09

Supercedes Date:

05/14/09

Document Group:

24-2445-5

ID Number(s):

60-4550-4828-4, 60-4550-4829-2, 70-0080-0006-2, 70-0080-0007-0, 70-0080-0008-8, 70-0080-0044-3, 70-

0080-0045-0, 70-0080-0047-6, 70-0080-0048-4, 70-0080-0052-6, 70-0080-0056-7, 70-0080-0058-3, 70-0080-

0059-1

This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for

each of these components is included. Please do not separate the component MSDSs from this cover page. The document

numbers of the MSDSs for components of this product are:

24-2444-8, 24-2136-0

Revision Changes:

Kit: Component document group number(s) was modified.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M

MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF

TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of

use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely

within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a

Summary of content (21 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 262, 262C, 262ES, 262T, 262W, 265, 265C, 265ES, 265L, 265W, 267, 267C 09/22/09 Material Safety Data Sheet Copyright, 2009, 3M Company. All rights reserved.
PAGE 2
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 262, 262C, 262ES, 262T, 262W, 265, 265C, 265ES, 265L, 265W, 267, 267C 09/22/09 particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
PAGE 3
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 Material Safety Data Sheet Copyright, 2010, 3M Company. All rights reserved.
PAGE 4
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 General Physical Form: Solid Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure and explode. Dust clouds of this material in combination with an ignition source may be explosive. May cause allergic skin reaction. 3.
PAGE 5
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes.
PAGE 6
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 Contain spill. Collect as much of the spilled material as possible using non-sparking tools. Use wet sweeping compound or water to avoid dusting. Sweep up. Clean up residue. In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations.
PAGE 7
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 Ingredient Authority BENZOYL PEROXIDE BENZOYL PEROXIDE CALCIUM SULFATE ACGIH OSHA ACGIH CALCIUM SULFATE CALCIUM SULFATE IRON OXIDE (FE2O3) IRON OXIDE (FE2O3) STEARATES ZINC STEARATE ZINC STEARATE ZINC STEARATE ZINC STEARATE OSHA OSHA ACGIH OSHA ACGIH ACGIH ACGIH OSHA OSHA ZINC STEARATE OSHA Type TWA TWA TWA, inhalable fraction TWA, respirable TWA, as tota
PAGE 8
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Stable unless exposed to heat, flames and drying conditions. Materials and Conditions to Avoid: 10.1 Conditions to avoid Heat 10.2 Materials to avoid Accelerators Additional Information: Storage at elevated temperatures will shorten shelf life.
PAGE 9
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 Since regulations vary, consult applicable regulations or authorities before disposal.
PAGE 10
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 WHMIS: Hazardous This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
PAGE 11
MATERIAL SAFETY DATA SHEET 3M™ Bondo Red Cream Hardener 307, 913, 913M, 913C, 913ES, 928, 928C, 9307, 7653079, 810505D, 510506D, 810507D 01/21/10 3M MSDSs are available at www.3M.
PAGE 12
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 Material Safety Data Sheet Copyright, 2010, 3M Company. All rights reserved.
PAGE 13
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 Odor, Color, Grade: Thick fiberous paste, styrene odor General Physical Form: Liquid Immediate health, physical, and environmental hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode.
PAGE 14
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 Kidney/Bladder Effects: Signs/symptoms may include changes in urine production, abdominal or lower back pain, increased protein in urine, increased blood urea nitrogen (BUN), blood in urine, and painful urination.
PAGE 15
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Water may be used to blanket the fire.
PAGE 16
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact. Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Safety Glasses with side shields Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact.
PAGE 17
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTI
PAGE 18
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 Strong bases Strong oxidizing agents Hazardous Polymerization: Hazardous polymerization will not occur.
PAGE 19
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information.
PAGE 20
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
PAGE 21
MATERIAL SAFETY DATA SHEET 3M™ Bondo Lightweight Body Filler 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 264, 264S, 265, 265C, 265ES, 265T, 265W, 267, 267C 04/14/10 _________________________________________________________________________________________________ Page 10 of 10