3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, Safety Data Sheet Copyright,2018,3M Company. All rights reserved.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, 2.2. Label elements Signal word Danger Symbols Flame | Exclamation mark | Health Hazard | Pictograms Hazard Statements Flammable liquid and vapor. Causes serious eye irritation. Suspected of causing cancer.
M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, If eye irritation persists: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. Storage: Store in a well-ventilated place. Store locked up. Keep cool.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, using this product and select specific local exhaust ventilation equipment to avoid flammable vapor accumulation. Ground/bond container and receiving equipment if there is potential for static electricity accumulation during transfer. 7.2. Conditions for safe storage including any incompatibilities Store in a well-ventilated place. Keep cool.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 Decomposition temperature Viscosity Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents 264, 264S, 265, 265C, 265ES, No Data Available No Data Available 0.372 lb HAPS/lb solids [Test Method:Calculated] 203 g/l [Test Method:calculated SCAQMD rule 443.1] 17.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 Inhalation: May be harmful if inhaled. Respiratory Tract Irritation: nose and throat pain. 264, 264S, 265, 265C, 265ES, Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and May cause additional health effects (see below). Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 Name Overall product Route Dermal Overall product No data available; calculated ATE20 - 50 mg/l Overall product InhalationVapor(4 hr) Ingestion Polyester Resin Dermal LD50 estimated to be > 5,000 mg/kg Polyester Resin Ingestion LD50 estimated to be 2,000 - 5,000 mg/kg Talc Dermal LD50 estimated to be > 5,000 mg/kg Talc Ingestion Styrene Monomer Styrene Monomer R
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, Serious Eye Damage/Irritation Name Species Value Talc Styrene Monomer Rabbit official classifica tion Rabbit Professio nal judgeme nt Rabbit Rabbit Rabbit Professio nal judgeme nt Rabbit No significant irritation Moderate irritant Species Guinea pig Mouse Human and animal Value Not classified Name Species Value Talc Human Not classified
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 Titanium Dioxide Ingestion Titanium Dioxide Inhalation Multiple animal species Rat 264, 264S, 265, 265C, 265ES, Not carcinogenic Carcinogenic Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test Result Talc Ingestion Not classified for development Rat NOAEL 1,600 mg/kg Styrene Monomer Ingestion Not classified for female
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 Talc Inhalation Styrene Monomer Inhalation pulmonary fibrosis | respiratory system eyes Not classified Rat Causes damage to organs through prolonged or repeated exposure May cause damage to organs though prolonged or repeated exposure May cause damage to organs though prolonged or repeated exposure Some positive data exist, but the data are not sufficient for classificatio
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 264, 264S, 265, 265C, 265ES, Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components.
3M™ Bondo® Lightweight Body Filler 260, 261, 261C, 261E, 262, 262C, 262ES, 262L, 262T, 262W, 263, 265T, 265W, 267, 267C 06/28/18 PARTICLES OF RESPIRABLE SIZE) Cadmium Cadmium Cadmium Styrene Monomer Titanium Dioxide None None None 100-42-5 Trade Secret 264, 264S, 265, 265C, 265ES, Male reproductive toxin Carcinogen Developmental Toxin Carcinogen Carcinogen 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA.
Cream Hardener (Red, White & Blue) 02/21/14 Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Cream Hardener (Red, White & Blue) 02/21/14 2.1. Hazard classification Organic Peroxide: Type E. Serious Eye Damage/Irritation: Category 2A. Skin Sensitizer: Category 1. 2.2. Label elements Signal word Warning Symbols Flame | Exclamation mark | Pictograms Hazard Statements Heating may cause a fire. Causes serious eye irritation. May cause an allergic skin reaction. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces.
Cream Hardener (Red, White & Blue) 02/21/14 Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician: Not applicable 2.3. Hazards not otherwise classified None. 6% of the mixture consists of ingredients of unknown acute dermal toxicity. 14% of the mixture consists of ingredients of unknown acute inhalation toxicity.
Cream Hardener (Red, White & Blue) 02/21/14 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode.
Cream Hardener (Red, White & Blue) 02/21/14 Keep container tightly closed. Protect from sunlight. Store away from heat. Store at temperatures not exceeding 32C/90F. Keep cool. Keep only in original container. Store away from other materials. Keep/store away from clothing and other combustible materials. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits Ingredient Iron Oxide (FE2O3) Iron Oxide (FE2O3) CYANIDES Zinc Stearate C.A.S. No.
Cream Hardener (Red, White & Blue) 02/21/14 Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Cream Hardener (Red, White & Blue) 02/21/14 Solubility in Water Solubility- non-water Negligible No Data Available Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents No Data Available No Data Available No Data Available No Data Available 0 % weight [Test Method: Calculated] 0 lb/gal [Test Method: calcu
Cream Hardener (Red, White & Blue) 02/21/14 classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1.
Cream Hardener (Red, White & Blue) 02/21/14 Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.
Cream Hardener (Red, White & Blue) 02/21/14 Name Benzoyl Peroxide Iron Oxide (FE2O3) Species Human and animal Human Value Sensitizing Species Value Some positive data exist, but the data are not sufficient for classification Respiratory Sensitization Name Germ Cell Mutagenicity Name Benzoyl Peroxide Benzoyl Peroxide Iron Oxide (FE2O3) Route In Vitro In vivo In Vitro Value Not mutagenic Not mutagenic Not mutagenic Carcinogenicity Name Benzoyl Peroxide Route Ingestion Benzoyl Peroxide Dermal
Cream Hardener (Red, White & Blue) 02/21/14 Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Oxirane, Polymer with Methyloxirane, Monobutyl Ether Ingestion nervous system Some positive data exist, but the data are not sufficient for classification Rat NOAEL Not available Exposure Duration Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Oxirane, Polymer with Methyloxirane, Monobut
Cream Hardener (Red, White & Blue) 02/21/14 SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Incinerate uncured product in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes.
Cream Hardener (Red, White & Blue) 02/21/14 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Cream Hardener (Red, White & Blue) 02/21/14 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application.
