SDS

ManualsBrands3M ManualsPaintSandBlaster™ 3-3/4" x 2-1/2" 36-Grit Paint-Stripping Sanding Sponge

3M™ Sandblaster™ Paint Stripping Sponge 11/12/13

__________________________________________________________________________________________

Page 1 of 8

Safety Data Sheet

allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from

3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group:

32-6419-9

Version Number:

1.00

Issue Date:

11/12/13

Supercedes Date:

Initial Issue

SECTION 1: Identification

1.1. Product identifier

3M™ Sandblaster™ Paint Stripping Sponge

Product Identification Numbers

70-0051-0548-4, 70-0051-0663-1, 70-0069-0918-1, 70-0069-0924-9, 70-0069-1227-6

1.2. Recommended use and restrictions on use

Recommended use

Abrasive Product

1.3. Supplier’s details

MANUFACTURER:

DIVISION:

Construction and Home Improvement Markets

ADDRESS:

3M Center, St. Paul, MN 55144-1000, USA

Telephone:

1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number

1-800-364-3577 or (651) 737-6501 (24 hours)

SECTION 2: Hazard identification

2.1. Hazard classification

Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.

2.2. Label elements

Signal word

Not applicable.

Symbols

Not applicable.

Pictograms

Not applicable.

2.3. Hazards not otherwise classified

None.

Summary of content (8 pages)

PAGE 1
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 Safety Data Sheet Copyright,2013,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 13% of the mixture consists of ingredients of unknown acute oral toxicity. SECTION 3: Composition/information on ingredients Ingredient Polyurethane Foam Cured Resin Silicon Carbide C.A.S. No. None Mixture 409-21-2 % by Wt 80 - 100 0 - 15 0 - 15 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Wash with soap and water.
PAGE 3
M™ Sandblaster™ Paint Stripping Sponge 11/12/13 Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Not applicable. 6.3. Methods and material for containment and cleaning up Not applicable. SECTION 7: Handling and storage 7.1. Precautions for safe handling Avoid breathing of dust created by cutting, sanding, grinding or machining. Keep out of reach of children.
PAGE 4
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 To minimize the risk of injury to face and eyes, always wear eye and face protection when working at sanding or grinding operations or when near such operations. Select and use eye/face protection to prevent contact based on the results of an exposure assessment.
PAGE 5
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Not determined 10.5. Incompatible materials Not determined 10.6. Hazardous decomposition products Substance None known. Condition Refer to section 5.2 for hazardous decomposition products during combustion.
PAGE 6
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 Silicon Carbide calculated ATE > 5,000 mg/kg LD50 estimated to be 2,000 - 5,000 mg/kg Ingestion ATE = acute toxicity estimate Skin Corrosion/Irritation Name Silicon Carbide Species Value Data not available or insufficient for classification Species Value Data not available or insufficient for classification Species Value Data not available or insufficient for classification Species Value Data not available or insufficient for classification Seri
PAGE 7
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1.
PAGE 8
3M™ Sandblaster™ Paint Stripping Sponge 11/12/13 Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.