MSDS

ManualsBrands3M ManualsPaint1 qt. All-Purpose Fiberglass Resin

MATERIAL SAFETY DATA SHEET 3M™ Bondo Fiberglass Resin Kit, P.N. 420, 420M, 420C, 420E, 420ES, 420K, 420T, 422, 422M,

422C

12/27/11

_________________________________________________________________________________________________________

Page 1 of 2

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

PRODUCT NAME:

3M™ Bondo Fiberglass Resin Kit, P.N. 420, 420M, 420C, 420E, 420ES, 420K,

420T, 422, 422M, 422C

MANUFACTURER:

DIVISION:

Automotive Aftermarket

ADDRESS:

3M Center, St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

12/27/11

Supercedes Date:

12/06/11

Document Group:

24-2334-1

ID Number(s):

60-4550-4825-0, 60-4550-4992-8, 60-4550-4994-4, 60-4550-5647-7, 60-4550-5648-5, 60-4550-5657-6, 60-

4550-6593-2, 60-4550-6595-7, 70-0080-0018-7, 70-0080-0019-5, 70-0080-0155-7, 70-0080-0156-5, 70-0080-

0157-3

This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for

each of these components is included. Please do not separate the component MSDSs from this cover page. The document

numbers of the MSDSs for components of this product are:

24-2330-9, 24-2331-7

Revision Changes:

Kit: ID Number(s) was modified.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M

MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF

TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of

use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely

Summary of content (19 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 3M™ Bondo Fiberglass Resin Kit, P.N. 420, 420M, 420C, 420E, 420ES, 420K, 420T, 422, 422M, 422C 12/27/11 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved.
PAGE 2
MATERIAL SAFETY DATA SHEET 3M™ Bondo Fiberglass Resin Kit, P.N. 420, 420M, 420C, 420E, 420ES, 420K, 420T, 422, 422M, 422C 12/27/11 within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers.
PAGE 3
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved.
PAGE 4
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 3.2 POTENTIAL HEALTH EFFECTS Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact: Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
PAGE 5
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.
PAGE 6
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
PAGE 7
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 Ingredient Authority Type SILICA CMRG SILICA, AMORPHOUS SILICA, AMORPHOUS OSHA OSHA TWA, as respirable dust TWA concentration TWA STYRENE MONOMER STYRENE MONOMER STYRENE MONOMER STYRENE MONOMER ACGIH ACGIH OSHA OSHA TWA STEL TWA CEIL Limit Additional Information 3 mg/m3 0.8 mg/m3 20 millions of particles/cu. ft.
PAGE 8
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 Materials and Conditions to Avoid: 10.1 Conditions to avoid Heat Sparks and/or flames 10.2 Materials to avoid Strong acids Strong bases Strong oxidizing agents Additional Information: Storage at elevated temperatures will shorten shelf life. Hazardous Polymerization: Hazardous polymerization will not occur.
PAGE 9
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 LB-K100-0410-5, LB-K100-0410-8, LB-K100-0543-7 For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information.
PAGE 10
MATERIAL SAFETY DATA SHEET 3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 08/04/11 Section 5: Flammable limits (LEL) information was modified. Section 9: Property description for optional properties was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 9: Flammable limits (LEL) information was modified. Section 9: Flammable limits (UEL) information was modified. Section 2: Ingredient table was modified.
PAGE 11
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Material Safety Data Sheet Copyright, 2012, 3M Company All rights reserved.
PAGE 12
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Odor, Color, Grade: Slight odor. Clear. General Physical Form: Liquid Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause chemical eye burns. May cause severe skin irritation.
PAGE 13
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention. Skin Contact: Remove contaminated clothing and shoes.
PAGE 14
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
PAGE 15
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber Polymer laminate . 8.2.
PAGE 16
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Density Vapor Density 1.128 g/ml No Data Available Vapor Pressure No Data Available Specific Gravity pH Melting point Solubility In Water Solubility in Water Evaporation rate Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Kow - Oct/Water partition coef Percent volatile VOC Less H2O & Exempt Solvents Viscosity 1.
PAGE 17
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION CHEMICAL FATE INFORMATION SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Incinerate in a permitted hazardous waste incinerator.
PAGE 18
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 STATE REGULATIONS Contact 3M for more information. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. The components of this product are listed on the Canadian Domestic Substances List. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information.
PAGE 19
MATERIAL SAFETY DATA SHEET 3M™ Bondo® MEKP Liquid Hardener for Fiberglass Resin Kit P.N. 420, 420C, 420E, 420K, 420T, 422, 422C 08/09/12 Revision Changes: Section 13: Waste disposal method information was modified. Section 13: EPA hazardous waste number (RCRA) information was modified. Section 8: Respiratory protection - recommended respirators was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 6: Environmental procedures information was modified.