3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 Flame | Corrosion | Exclamation mark | Pictograms Hazard Statements Heating may cause a fire. Harmful if swallowed. Causes serious eye damage. Causes severe skin burns and eye damage. Harmful if inhaled. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep away from clothing and other combustible materials.
M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 SECTION 3: Composition/information on ingredients Ingredient Dimethyl Phthalate Methyl Ethyl Ketone Peroxide Phlegmatizer Methyl Ethyl Ketone Hydrogen Peroxide Water C.A.S. No.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 prevent explosive rupture. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 Flammable Limits(UEL) Vapor Pressure Vapor Density Density Specific Gravity Solubility In Water Solubility in Water Solubility- non-water Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents No Data Available No Data Available >1 1.1 g/ml 1.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Harmful if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May cause additional health effects (see below).
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 15.1. US Federal Regulations Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No Dimethyl Phthalate 131-11-3 % by Wt 30 - 60 15.2.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 Safety Data Sheet Copyright,2017,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 Flammable Liquid: Category 3. Serious Eye Damage/Irritation: Category 2B. Carcinogenicity: Category 2. Specific Target Organ Toxicity (single exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word Danger Symbols Flame | Exclamation mark | Health Hazard | Pictograms Hazard Statements Flammable liquid and vapor.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Cover spill area with a fire-extinguishing foam. An appropriate aqueous film forming foam (AFFF) is recommended.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment. 8.2.2.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 9.1. Information on basic physical and chemical properties General Physical Form: Liquid Specific Physical Form: Paste Odor, Color, Grade: Pungent organic odor. Light straw color. Odor threshold No Data Available pH No Data Available Melting point No Data Available Boiling Point 180 ºF - 415 ºF Flash Point 88 ºF [Test Method:Closed Cup] Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) 1.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 10.5. Incompatible materials Strong acids Strong bases Strong oxidizing agents 10.6. Hazardous decomposition products Substance Hydrocarbons Carbon monoxide Carbon dioxide Condition Not Specified Not Specified Not Specified SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 Additional Health Effects: Single exposure may cause target organ effects: Auditory Effects: Signs/symptoms may include hearing impairment, balance dysfunction and ringing in the ears. Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 Styrene Monomer Silica Silica 12/22/17 hours) Ingestion Dermal InhalationDust/Mist (4 hours) Ingestion Rat Rabbit Rat LD50 5,000 mg/kg LD50 > 5,000 mg/kg LC50 > 0.
3M™ Bondo® All Purpose Fiberglass Resin, P.N.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Styrene Monomer Inhalation eyes Human Styrene Monomer Inhalation auditory system NOAEL Not available NOAEL 1.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Incinerate uncured product in a permitted waste incineration facility. Dispose of completely cured (or polymerized) material in a permitted industrial waste facility. As a disposal alternative, incinerate uncured product in a permitted waste incineration facility.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 15.2. State Regulations Contact 3M for more information. California Proposition 65 Ingredient C.A.S. No. Classification Styrene Monomer 100-42-5 Carcinogen WARNING: This product contains a chemical known to the State of California to cause cancer. 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4.
3M™ Bondo® All Purpose Fiberglass Resin, P.N. 20122, 20124 12/22/17 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE.
