Datasheet

ManualsBrands3M ManualsCable Accessories17017CLR Clip Self-adhesive Bundle Ø range 5 mm (max) Transparent 4 pc(s)

Command™ Adhesive Products

General Description

Command™ Adhesive

is a high performance pressure

sensitive foam tape designed with

a unique, stretchable

backing which allows clean, damage

-free removal from

most surfaces while having strong holding power

on a

wide variety of surfaces.

The adhesive strips are quick

and easy to install without tools.

The Command™ Product Line include

s hooks, hangers,

and clips that are designed to work with the Command™

Adhesive Strips to meet decorating and organizing needs

in the home or office.

Strip

Construction

Foam Type Polyethylene

Adhesive Type Rubber

Average Thickness (Foam Only) 0.042 in

Color White

Release Liner 0.003 inch, red and black printed paper

Approximate Foam Density 12 lb/ft

(192 kg/cm

)

ypical Physical

Properties and

Performance

Characteristics

Note: The following technical information and data should be considered

representative or typical only and should not be used for specification purposes.

Peel Adhesion (ASTM D-3330)

6 lbs/in width (58 N/100mm)

Static Shear Strength (ASTM D-3654)

1000 g at 72°F (22°C)

Dynamic Shear (ASTM D-1002)

100 lbs. (45 kg)

Temperature Resistance

15°F to 120°F (-10°C to 50°C)

U.V. Resistance

Not recommended for direct

exposure to U.V. light

Solvent Resistance

No apparent degradation when

exposed to splash testing of most

hydrocarbon solvents

Shelf Life

24 months from the date of

manufacture when stored in

original cartons at 70°F (21°C) and

50% relative humidity

Summary of content (3 pages)

PAGE 1
Command™ Adhesive Products General Description Command™ Adhesive is a high performance pressure sensitive foam tape designed with a unique, stretchable backing which allows clean, damage-free removal from most surfaces while having strong holding power on a wide variety of surfaces. The adhesive strips are quick and easy to install without tools.
PAGE 2
Available Sizes Mini Small Medium Large Strip Width & Length Tab Length Adhesive Width & Length (Wall Side) Adhesive Width & Length (Object Side) 0.50” x 1.177” (1.27 cm x 2.99 cm) 0.625” x 1.813” (1.58 cm x 4.60 cm) 0.625” x 2.750” (1.58 cm x 6.98 cm) 0.75”x 3.650” (1.90 cm x 9.27 cm) 0.55” (1.40 cm) 0.75” (1.90 cm) 0.75” (1.90 cm) 0.75” (1.90 cm) 0.50” x 0.61” (1.27 cm x 1.55 cm) 0.625” x 1.06” (1.58 cm x 2.69 cm) 0.625” x 2.00” (1.58 cm x 5.08 cm) 0.75” x 2.90” (1.90 cm x 7.36 cm) 0.50” x 0.
PAGE 3
To Mount: 1. To obtain optimum adhesion, the bonding surface must be clean and dry. Clean surface with isopropyl rubbing alcohol, wipe gently and let dry. Do not use household cleaners. 2. Separate the strips and remove the red liner. Press adhesive to back of hook or clip. 3. Remove black liner. Press the hook to the surface firmly for 10 seconds. 4. For hooks with a separate back plate, slide the hook up to remove from the back plate. 5. Press the back plate firmly for 30 seconds.