Datasheet

Storage conditions
-10°C to +20°C and less than 80% relative humidity.
Operating temperatures
-10°C to +40°C.
Shelf life
When stored as stated, the expected shelf life of the product
is 1 year from date of manufacture. The ‘in-use’ life of the
product will vary with frequency and conditions of use.
Ineveryday use, the expected ‘in-use’ life is 1-2 years.
*The shelf life as defined above remains an indicative and, subject to many
external and non-controllable factors. It may never be interpreted as a warranty.
Materials
Component Material
Scroll front assembly Acrylonitrile butadiene styrene (ABS)
Scroll rear
andbatteryhousing
Acrylonitrile butadiene styrene (ABS)
Gasket Thermoplastic elastomers (TPE)
Button and USB over mould Thermoplastic elastomers (TPE)
Button frame Acrylonitrile butadiene styrene (ABS)
Cover Acrylonitrile butadiene styrene (ABS)
Impeller Polyphenylene Ether (PPE)
andPolystyrene
Motor assembly Mixed
Battery Lithium-ion chemistry
Materials from animal origin are not intentionally added to these products.
Charge status indicator lights
Colour and light
appearance
Status Action required
Green/orange
(alternating flashes)
Battery charging
Green (continuous) Battery fully charged Remove charger
Green (fast flashes) Start button pressed
or fan stopping
Green (slow flashes) Normal operation,
fan running
Red (occasional
flashes)
Approx. 5% charge
remaining
Recharge required
toavoid fan shutdown
Care schedule
What When
General inspection Before use
Battery charging Daily, or before use if not used
daily,or at least every month
ifnotused regularly
Cleaning When necessary
Replace 3M
™
4000+ As per user change schedule
3M Ireland Limited
The Iveagh Building
The Park, Carrickmines
Dublin 18
t: 1 800 320 500
Important notice
The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any
use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage
of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules,
procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify
orcontrol those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.
Respiratory Protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to respiratory contaminants. 3M offers advice on the selection
of products, and training in the correct fitting and usage.
For more information on 3M products and services please contact 3M.
Personal Safety Division
3M United Kingdom PLC
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
t: 0870 60 800 60
www.3M.eu/PPEsafety
Please recycle. Printed in the UK. 3M and Cool Flow
aretrademarks of the 3M company. © 3M 2019. All rights
reserved. J470335
3M
™
Cool Flow
™
Fan 1040 Series