Datasheet

ManualsBrands3M ManualsConnectorsMDR socket 36 Female Solder PCB THT/Straight

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Through-Hole Vertical Receptacle - Shielded 102 Series

Physical

Electrical

Environmental

Insulation Material:

Glass Filled Polyester (PBT) or Glass Filled Polyester (PCT) - (High Temp.

Option) - See ordering information

Flammability:

UL 94V-0

Color:

Black (PBT) or Beige (PCT)-High Temp. Option - See ordering information

Contact Material:

Copper Alloy

Plating Underplating:

100 μ″ [ 2.5 μm ] Nickel

Wiping Area:

30 μ″ [ 0.76 μm ] Min. Gold

Solder Tail Plating:

Gold flash over Nickel (RIA E1 & C1 apply)

Body Material:

Zinc Alloy

Plating:

Nickel

Shroud & Latch Hook

Material:

Steel

Plating:

Nickel

Marking:

3M Logo and Part Number

Current Rating:

1 A

Insulation Resistance:

> 5 × 10

at 500 V

Withstanding Voltage:

500 V

RMS

for 1 Minute

Temperature Rating:

-20°C to +85°C

PBT Insulation Process Rating:

Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat, 60 sec.

max. duration.

PCT Insulation Process Rating:

High Temp. Option:

260°C (profile per J-STD-020C)

• Wiper-on-wiper contact for reliable repetitive

plugging

• Rugged die cast metal case construction

• Screw lockdown for reliable PCB retention

• Interface latch design for connection stability

• IEEE 1284C Interface as a 36 contact connector

• Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100

•

See Regulatory Information Appendix (RIA) for

chemical compliance information.

TS-0427-B

Sheet 1 of 3

Date Modified: November 26, 2007

UL File No.: E68080

Summary of content (6 pages)

PAGE 1
3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Vertical Receptacle - Shielded 102 Series • Wiper-on-wiper contact for reliable repetitive plugging • Rugged die cast metal case construction • Screw lockdown for reliable PCB retention • Interface latch design for connection stability • IEEE 1284C Interface as a 36 contact connector • Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100 • See Regulatory Information Appendix (RIA) for chemical compliance information.
PAGE 2
3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Vertical Receptacle - Shielded Contact Quantity 14 20 26 36 40 50 68 80 100 102 Series A B Dim ensions C D E 0.300 [ 7.62 ] 0.450 [ 11.43 ] .600 [ 15.24 ] .850 [ 21.59 ] .950 [ 24.13 ] 1.200 [ 30.48 ] 1.650 [ 41.91 ] 1.950 [ 49.53 ] 2.450 [ 62.23 ] 0.93 [ 23.6 ] 1.08 [ 27.5 ] 1.23 [ 31.3 ] 1.48 [ 37.6 ] 1.58 [ 40.2 ] 1.83 [ 46.5 ] 2.28 [ 57.9 ] 2.58 [ 65.6 ] 3.08 [ 78.3 ] 1.16 [ 29.5 ] 1.31 [ 33.4 ] 1.46 [ 37.2 ] 1.71 [ 43.5 ] 1.
PAGE 3
M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Vertical Receptacle - Shielded 102 Series Recommended Board Layout Viewed from Connector Side Di m e n s i on s C on tact Q u an ti ty A B 20 .450 [ 11.43 ] 1.081 [ 27.45 ] 36 .850 [ 21.59 ] 1.481 [ 37.61 ] 40 .950 [ 24.13 ] 1.581 [ 40.15 ] 68 1.650 [ 41.91 ] 2.281 [ 57.93 ] 80 1.950 [ 49.53 ] 2.581 [ 65.55 ] 100 2.450 [ 62.23 ] 3.081 [ 78.25 ] 20, 36, 40, 68, 80 and 100 pos only Position 3 Position 1 .112 [ 2.
PAGE 4
Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC.
PAGE 5
Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
PAGE 6
Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.