SDS

MATERIAL SAFETY DATA SHEET 3M™ Contour Sanding Sponge - Aluminum Oxide Mineral (OUS-sourced) 08/04/09
_________________________________________________________________________________________________
Page 1 of 6
Material Safety Data Sheet
Copyright, 2009, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
3M™ Contour Sanding Sponge - Aluminum Oxide Mineral (OUS-sourced)
MANUFACTURER:
3M
DIVISION:
Abrasives Systems Division
ADDRESS:
3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: [phone] or [phone] (24 hours)
Issue Date:
08/04/09
Supercedes Date:
11/11/05
Document Group:
20-7329-4
Product Use:
Intended Use: Abrasive Product
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
Foam Backing None 80 - 90
ALUMINUM OXIDE MINERAL 1344-28-1 5 - 25
Cured Adhesive None 5 - 10
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Solid Abrasive Product
General Physical Form: Solid
Immediate health, physical, and environmental hazards: This document covers only the 3M product. For complete assessment,
when determining the degree of hazard, the material being abraded must also be considered.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Mechanical eye irritation: Signs/symptoms may include pain, redness, tearing and corneal abrasion.
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.