MSDS

MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12
_
_______________________________________________________________________________________________
_
Page 8 of 9
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient C.A.S. No % by Wt
ZINC STEARATE (ZINC COMPOUNDS) 557-05-1 3 - 7
BENZOYL PEROXIDE 94-36-0 30 - 60
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
WHMIS: Hazardous
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 1 Reactivity: 1 Special Hazards: Oxidizer
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known
to be generated in significant quantities.
HMIS Hazard Classification
Health: 2 Flammability: 1 Reactivity: 1 Protection: X - See PPE section.