MSDS

MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12
_
_______________________________________________________________________________________________
_
Page 6 of 9
General Physical Form:
Solid
Autoignition temperature
No Data Available
Flash Point
111 ºC [Test Method: Estimated]
Flammable Limits(LEL)
Not Applicable
Flammable Limits(UEL)
Not Applicable
Boiling Point
No Data Available
Density
1.2 g/cm3
Vapor Density
Not Applicable
Vapor Pressure
Not Applicable
Specific Gravity
1.2 [@ 25 ºC] [Ref Std: WATER=1]
pH
No Data Available
Melting point
No Data Available
Solubility in Water
Negligible
Evaporation rate
No Data Available
Hazardous Air Pollutants
0 % weight [Test Method: Calculated]
Volatile Organic Compounds
0 lb/gal [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
0 g/l [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
0 % weight [Test Method: calculated per CARB title 2]
Kow - Oct/Water partition coef
No Data Available
Percent volatile
20 % [Details: Water is the volatile component]
VOC Less H2O & Exempt Solvents
0 g/l [Test Method: calculated SCAQMD rule 443.1]
Viscosity
No Data Available
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable. Stable unless exposed to heat, flames and drying conditions.
Materials and Conditions to Avoid:
10.1 Conditions to avoid
Heat
10.2 Materials to avoid
Accelerators
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide Not Specified
Carbon dioxide Not Specified
Toxic Vapor, Gas, Particulate Not Specified