MSDS

ManualsBrands3M ManualsTools & HardwareBondo 2.75 oz. Red Rouge Cream Hardener

MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12

_______________________________________________________________________________________________

Page 1 of 9

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R

MANUFACTURER:

DIVISION:

Automotive Aftermarket

ADDRESS:

3M Center, St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

08/07/12

Supercedes Date:

02/10/12

Document Group:

24-7410-4

Product Use:

Intended Use: Automotive

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

BENZOYL PEROXIDE 94-36-0 30 - 60

WATER 7732-18-5 10 - 30

BENZOIC ACID, C9-11-BRANCHED ALKYL ESTERS 131298-44-7 10 - 20

ZINC STEARATE 557-05-1 3 - 7

OXIRANE, POLYMER WITH METHYLOXIRANE, MONOBUTYL ETHER 9038-95-3 1 - 5

CALCIUM SULFATE 7778-18-9 1 - 5

IRON OXIDE (FE2O3) 1309-37-1 1 - 5

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW

Specific Physical Form: Viscous

Summary of content (9 pages)

PAGE 2
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 Odor, Color, Grade: Red paste with slight ester odor General Physical Form: Solid Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure and explode. Dust clouds of this material in combination with an ignition source may be explosive. May cause severe eye irritation. May cause allergic skin reaction. 3.
PAGE 3
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention. Skin Contact: Remove contaminated clothing and shoes.
PAGE 4
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 vapors in the spill area to burn or explode. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. 6.2. Environmental precautions For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Place in a metal container approved for use in transportation by appropriate authorities.
PAGE 5
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Polymer laminate . Use an additional glove (e.g.
PAGE 6
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 General Physical Form: Autoignition temperature Flash Point Flammable Limits(LEL) Flammable Limits(UEL) Boiling Point Density Vapor Density Solid No Data Available 111 ºC [Test Method: Estimated] Not Applicable Not Applicable No Data Available 1.2 g/cm3 Not Applicable Vapor Pressure Not Applicable Specific Gravity pH Melting point 1.
PAGE 7
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined.
PAGE 8
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No ZINC STEARATE (ZINC COMPOUNDS) 557-05-1 % by Wt 3- 7 BENZOYL PEROXIDE 94-36-0 30 - 60 STATE REGULATIONS Contact 3M for more information. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA.
PAGE 9
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Red Cream Hardener 1, 4, 9, 301, 304, 30748, 9301, 9307R 08/07/12 Hazardous Material Identification System (HMIS®) hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations. HMIS® ratings are to be used with a fully implemented HMIS® program.