MSDS

MATERIAL SAFETY DATA SHEET 3M(TM) Marine Ultra Performance Paste Wax, PN 09030 06/08/12
_
_______________________________________________________________________________________________
_
Page 3 of 8
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never
give anything by mouth to an unconscious person. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Autoignition temperature
No Data Available
Flash Point
[Details: FLAMMABLE SOLID]
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
No Data Available
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).
Unusual Fire and Explosion Hazards: Flammable solid.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal
decomposition information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Remove all
ignition sources such as flames, smoking materials, and electrical spark sources. Use only non-sparking tools. Ventilate the area with
fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with
good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the
spill area to burn or explode. Avoid contact with incompatible materials listed in the Reactivity Data Section.
6.2. Environmental precautions
Place in a metal container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
Clean-up methods
Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill.
Collect as much of the spilled material as possible using non-sparking tools. Clean up residue.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.