MSDS

3M MATERIAL SAFETY DATA SHEET 3M(TM) Marine Fiberglass Restorer and Wax, P.N. 09005, 09005F, 09005I; 09006, 09006E;
09007, 09007E 10/02/2006
_________________________________________________________________________________________________
Page 5 of 8
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
ETHYL ACRYLATE ACGIH TWA 5 ppm Table A4
ETHYL ACRYLATE ACGIH STEL 15 ppm Table A4
ETHYL ACRYLATE OSHA TWA 5 ppm Skin Notation*; Table Z-1A
ETHYL ACRYLATE OSHA STEL 25 ppm Skin Notation*; Table Z-1A
FORMALDEHYDE ACGIH CEIL 0.3 ppm Sensitizer; Table A2
FORMALDEHYDE OSHA TWA 0.5 ppm Standard Appendix
HYDROTREATED LIGHT PETROLEUM
DISTILLATES
CMRG TWA 300 ppm
OIL MIST, MINERAL ACGIH TWA, as mist 5 mg/m3
OIL MIST, MINERAL ACGIH STEL, as mist 10 mg/m3
OIL MIST, MINERAL OSHA TWA, as mist 5 mg/m3 Table Z-1
STEARATES ACGIH TWA, as total dust 10 mg/m3 Table A4
TRIPOLI (CRYSTALLINE SILICA) ACGIH TWA, respirable 0.025 mg/m3 Table A2
TRIPOLI (CRYSTALLINE SILICA) OSHA TWA, respirable 0.1 mg/m3 Table Z-1A
VEGETABLE OIL MISTS OSHA TWA, as mist 10 mg/m3 Table Z-1A
VEGETABLE OIL MISTS (EXCEPT
CASTOR, CASHEW, OR SIMILAR
IRRITANT OILS)
ACGIH TWA, as mist 10 mg/m3
* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye,
either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Paste
Odor, Color, Grade:
mild solvent odor, tan to beige color.
General Physical Form:
Liquid
Autoignition temperature
No Data Available
Flash Point
150 ºF [Test Method: Pensky-Martens Closed Cup] [Details:
CONDITIONS: ASTM D93]
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
No Data Available
Boiling point
150 - 212 ºF
Density
9.3 - 9.8 lb/gal
Vapor Density
>=1.00 [Ref Std: AIR=1]
Vapor Pressure
<=16 mmHg
Specific Gravity
1.14 [Ref Std: WATER=1]
pH
8.0 - 8.5
Melting point
Not Applicable