MSDS

MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09
_________________________________________________________________________________________________
Page 5 of 8
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Odor, Color, Grade:
clear, ketone odor
General Physical Form:
Liquid
Autoignition temperature
404 ºC [Details: MEK]
Flash Point
20.00 ºF [Test Method: Tagliabue Closed Cup] [Details:
CONDITIONS: (methyl ethyl ketone)]
Flammable Limits - LEL
1.80 % volume
Flammable Limits - UEL
10 % volume
Boiling point
176.00 ºF [Details: CONDITIONS: (MEK)]
Density
7.9 - 8.3 lb/gal
Vapor Density
2.41 [Ref Std: AIR=1]
Vapor Pressure
91 mmHg [Details: CONDITIONS: @ 68F]
Specific Gravity
0.950 [Ref Std: WATER=1]
pH
No Data Available
Melting point
No Data Available
Evaporation rate
2.70 [Ref Std: WATER=1]
Volatile Organic Compounds
4.61 lb/gal [Test Method: calculated SCAQMD rule 443.1]
Percent volatile
58.27 % weight
VOC Less H2O & Exempt Solvents
551.95 g/l [Test Method: calculated SCAQMD rule 443.1]
Viscosity
Approximately 8500 centipoise
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Sparks and/or flames; Heat
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide Not Specified
Carbon dioxide Not Specified
Toxic Vapor, Gas, Particulate Not Specified
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION