MSDS

ManualsBrands3M ManualsPaint5 fl. oz. Plastic Adhesive (Case of 6)

MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09

_________________________________________________________________________________________________

Page 1 of 8

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061

MANUFACTURER:

DIVISION:

Automotive Aftermarket

ADDRESS:

3M Center

St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

03/20/09

Supercedes Date:

03/20/09

Document Group:

10-4794-3

Product Use:

Intended Use: Adhesive

Specific Use: Clear Adhesive for Plastic Repair and Emblem Application

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

METHYL ETHYL KETONE 78-93-3 30 - 60

Adipic acid-1,4-butanediol-MDI-neopentyl glycol copolymer 56815-45-3 10 - 30

VINYL CHLORIDE-VINYL ACETATE-MALEIC ACID POLYMER 9005-09-8 10 - 30

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW

Odor, Color, Grade: clear, ketone odor

General Physical Form: Liquid

Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure and

explode. Extremely flammable liquid and vapor. Dust clouds of this material in combination with an ignition source may be

explosive. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause

target organ effects.

Summary of content (8 pages)

PAGE 2
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 3.2 POTENTIAL HEALTH EFFECTS Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
PAGE 3
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 5.1 FLAMMABLE PROPERTIES Autoignition temperature Flash Point Flammable Limits - LEL Flammable Limits - UEL OSHA Flammability Classification: 404 ºC [Details: MEK] 20.00 ºF [Test Method: Tagliabue Closed Cup] [Details: CONDITIONS: (methyl ethyl ketone)] 1.80 % volume 10 % volume Class IB Flammable Liquid 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g.
PAGE 4
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment. 7.2 STORAGE Store away from acids. Store away from heat. Store out of direct sunlight. Keep container in well-ventilated area. Keep container tightly closed. Store away from oxidizing agents.
PAGE 5
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Flammable Limits - LEL Flammable Limits - UEL Boiling point Density Vapor Density clear, ketone odor Liquid 404 ºC [Details: MEK] 20.00 ºF [Test Method: Tagliabue Closed Cup] [Details: CONDITIONS: (methyl ethyl ketone)] 1.80 % volume 10 % volume 176.00 ºF [Details: CONDITIONS: (MEK)] 7.9 - 8.3 lb/gal 2.
PAGE 6
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Incinerate in a permitted hazardous waste incinerator. Combustion products will include HCl. Facility must be capable of handling halogenated materials. As a disposal alternative, dispose of waste product in a permitted hazardous waste facility.
PAGE 7
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
PAGE 8
MATERIAL SAFETY DATA SHEET 3M(TM) Plastic and Emblem Adhesive - Clear, P.N. 08061 03/20/09 particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.