SDS

3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19
__________________________________________________________________________________________
Page 6 of 12
Boiling Point
180 ºF - 415 ºF
Flash Point
88 ºF [Test Method:Closed Cup]
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
1.1 %
Flammable Limits(UEL)
No Data Available
Vapor Pressure
3.45 mmHg
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Density
1.14 g/ml
Specific Gravity
1.14 [Ref Std:WATER=1]
Solubility in Water
Negligible
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
No Data Available
Hazardous Air Pollutants
33.8 lb HAPS/lb solids [Test Method:Calculated]
Volatile Organic Compounds
386 g/l [Test Method:calculated SCAQMD rule 443.1]
Volatile Organic Compounds
33.8 % weight [Test Method:calculated per CARB title 2]
Percent volatile
33.8 % weight
VOC Less H2O & Exempt Solvents
386 g/l [Test Method:calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Heat
Sparks and/or flames
10.5. Incompatible materials
Strong acids
Strong bases
Strong oxidizing agents
10.6. Hazardous decomposition products
Substance
Condition
Hydrocarbons
Not Specified
Carbon monoxide
Not Specified
Carbon dioxide
Not Specified
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient