SDS

3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081
__________________________________________________________________________________________
Page: 6 of 11
Decomposition temperature
No Data Available
Viscosity
No Data Available
Volatile Organic Compounds
39 g/l [Test Method:calculated SCAQMD rule 443.1]
Volatile Organic Compounds
3.5 % weight [Test Method:Tested per ASTM protocol]
Percent volatile
45 % weight
VOC Less H2O & Exempt Solvents
39 g/l [Test Method:calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Light
Sparks and/or flames
Temperatures above the boiling point
10.5. Incompatible materials
Strong oxidizing agents
Alkali and alkaline earth metals
Strong acids
10.6. Hazardous decomposition products
Substance
Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
May be harmful if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge,
headache, hoarseness, and nose and throat pain.
Skin Contact: