SDS

3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081
__________________________________________________________________________________________
Page: 2 of 11
2.2. Label elements
Signal word
Danger
Symbols
Flame | Corrosion | Exclamation mark |
Pictograms
Hazard statements
Heating may cause a fire.
Harmful if swallowed. Causes severe skin burns and eye damage.
Precautionary statements
General:
Keep out of reach of children. Read label before use. If medical advice is needed, have product container or label at hand.
Prevention:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground and bond container
and receiving equipment. Keep only in original packaging. Keep cool. Do not breathe dust/fume/gas/mist/vapours/spray.
Wear protective gloves, protective clothing, and eye/face protection. Do not eat, drink or smoke when using this product.
Wash exposed skin thoroughly after handling.
Response:
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE or
doctor/physician. Wash contaminated clothing before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
Storage:
Protect from sunlight. Store in a well-ventilated place. Store at temperatures not exceeding 5C/40F. Store locked up. Store
separately.
Disposal:
Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
2.3. Other hazards
May cause chemical gastrointestinal burns.
1% of the mixture consists of ingredients of unknown acute inhalation toxicity.
SECTION 3: Composition/information on ingredients
This material is a mixture.
Ingredient
C.A.S. No.
% by Wt
Common Name
Dimethyl Phthalate
131-11-3
30 - 60
1,2-Benzenedicarboxylic acid, dimethyl
ester