MSDS

SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372
(EPCRA):
Ingredient C.A.S. No % by Wt
DIMETHYL PHTHALATE 131-11-3 30 - 60
STATE REGULATIONS
Contact 3M for more information.
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® MEKP Liquid Hardener 09/12/11
____________________________________________________________________________________
_____________
Page 7 of 9
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
The components of this product are listed on the Canadian Domestic Substances List.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 3 Flammability: 1 Reactivity: 1 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the
hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are
primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition
products that are known to
be generated in significant quantities.
HMIS Hazard Classification
Health: 3 Flammability: 1 Reactivity: 1 Protection: X - See PPE section.
Hazardous Material Identification System (HMIS®) hazard ratings are designed to inform employees of chemical hazards in the
workplace. These
ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use
in emergency
situations. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National
Paint and Coatings
Association (NPCA).
Reason for Reissue: The MSDS has been revised because 3M has adopted the 16-section ANSI/ISO format. The
potential hazards of
the product have not changed. We encourage you to reread the MSDS and review the information.
Revision Changes:
Section 1: Product name was modified.
Section 1: Product use information was modified.
Section 16: Disclaimer (second paragraph) was modified.
Section 3: Potential effects from skin contact information was modified.
Section 3: Potential effects from inhalation information was modified.
Section 3: Potential effects from ingestion information was modified.
Section 10: Hazardous decomposition or by-products table was modified.
Section 8: Eye/face protection information was modified.
Section 8: Skin protection - recommended gloves information was modified.
Section 8: Respiratory protection - recommended respirators information was modified.
Section 4: First aid for ingestion (swallowing) - decontamination - was modified.