MSDS

ManualsBrands3M ManualsPaintBondo 118 oz. Fiberglass Resin

MATERIAL SAFETY DATA SHEET 3M™ Dynatron® MEKP Liquid Hardener 09/12/11

____________________________________________________________________________________

_____________

Page 1 of 9

Material Safety Data Sheet

of properly

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior

written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of

earning a profit

thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: 3M™ Dynatron® MEKP Liquid Hardener

MANUFACTURER: 3M

DIVISION: Automotive Aftermarket

ADDRESS: 3M Center, St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 09/12/11

Supercedes Date: 01/21/10

Document Group: 24-8475-6

Product Use:

Intended Use: Automotive

Specific Use: Curing Agent

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

DIMETHYL PHTHALATE 131-11-3 30 - 60

METHYL ETHYL KETONE PEROXIDE 1338-23-4 15 - 40

2,2,4-TRIMETHYL-1,3-PENTANEDIOL DIISOBUTYRATE 6846-50-0 10 - 30

METHYL ETHYL KETONE 78-93-3 1 - 5

HYDROGEN PEROXIDE 7722-84-1 0.5 1.5

WATER 7732-18-5 0.5 1.5

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW

Odor, Color, Grade: Slight odor. Clear.

General Physical Form: Liquid

Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build

pressure and

explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause

chemical

eye burns. May cause severe skin irritation. May cause target organ effects.

MATERIAL SAFETY DATA SHEET 3M™ Dynatron® MEKP Liquid Hardener 09/12/11

____________________________________________________________________________________

_____________

Page 2 of 9

3.2 POTENTIAL HEALTH EFFECTS

Eye Contact:

Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain,

tearing,

ulcerations, significantly impaired vision or complete loss of vision.

Skin Contact:

Severe Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking,

blistering, and pain.

Prolonged or repeated exposure may cause:

Dermal Effects: Signs/symptoms may include changes in skin pigmentation and/or coloration.

Summary of content (27 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® MEKP Liquid Hardener 09/12/11 ____________________________________________________________________________________ _____________ Page 1 of 9 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved.
PAGE 2
Inhalation: May be harmful if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May be absorbed following inhalation and cause target organ effects. Ingestion: May be harmful if swallowed. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects.
PAGE 3
SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
PAGE 4
vapor, or spray. If ventilation is not adequate, use respiratory protection equipment. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact. Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment.
PAGE 5
Boiling Point 244 ºF Density 1.128 g/ml Vapor Density No Data Available Vapor Pressure No Data Available Specific Gravity 1.128 [Ref Std: WATER=1] pH No Data Available Melting point No Data Available Solubility In Water No Data Available Solubility in Water Negligible Evaporation rate No Data Available Hazardous Air Pollutants 43.0 % weight [Test Method: Calculated] Volatile Organic Compounds 903 g/l [Test Method: calculated SCAQMD rule 443.1] Volatile Organic Compounds 80.
PAGE 6
SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt DIMETHYL PHTHALATE 131-11-3 30 - 60 STATE REGULATIONS Contact 3M for more information.
PAGE 7
Section 4: First aid for ingestion (swallowing) - medical assistance - was modified. Section 14: Transportation legal text was modified. Section 16: HMIS explanation was modified. Page Heading: Product name was modified. Section 9: Vapor density value was modified. Section 9: Vapor pressure value was modified. Section 9: Boiling point information was modified. Section 5: Flammable limits (UE) information was modified. Section 5: Flammable limits (LEL) information was modified.
PAGE 8
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application.
PAGE 9
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Fiberglass Resin, P.N. 692, 694 08/04/11 ____________________________________________________________________________________ _____________ Page 1 of 8 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved.
PAGE 10
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Auditory Effects: Signs/symptoms may include hearing impairment, balance dysfunction and ringing in the ears.
PAGE 11
Unusual Fire and Explosion Hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1.
PAGE 12
or spray. Keep out of the reach of children. Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid contact with oxidizing agents. Avoid skin contact. 7.2 STORAGE Store away from acids. Store away from heat. Store out of direct sunlight. Keep container in well-ventilated area. Keep container tightly closed. Do not store containers on their sides. Store away from oxidizing agents. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.
PAGE 13
ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Paste Odor, Color, Grade: Pungent organic odor. Light straw color.
PAGE 14
components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Incinerate in a permitted hazardous waste incinerator. As a disposal alternative, dispose of waste product in a permitted hazardous waste facility. EPA Hazardous Waste Number (RCRA): D001 (Ignitable) Since regulations vary, consult applicable regulations or authorities before disposal.
PAGE 15
Section 9: Boiling point information was modified. Section 5: Flammable limits (UE) information was modified. Section 5: Flammable limits (LEL) information was modified. Section 9: Property description for optional properties was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 9: Flammable limits (LEL) information was modified. Section 9: Flammable limits (UEL) information was modified. Section 2: Ingredient table was modified.
PAGE 16
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 17
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 Symbols Flame | Corrosion | Exclamation mark | Pictograms Hazard Statements Heating may cause a fire. Harmful if swallowed. Causes serious eye damage. Causes severe skin burns and eye damage. Harmful if inhaled. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep away from clothing and other combustible materials.
PAGE 18
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 May cause chemical gastrointestinal burns. 64% of the mixture consists of ingredients of unknown acute inhalation toxicity. SECTION 3: Composition/information on ingredients Ingredient Dimethyl Phthalate Methyl Ethyl Ketone Peroxide 2,2,4-Trimethyl-1,3-Pentanediol Diisobutyrate Methyl Ethyl Ketone Hydrogen Peroxide Water C.A.S. No.
PAGE 19
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 5.3. Special protective actions for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
PAGE 20
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 Hydrogen Peroxide 7722-84-1 Hydrogen Peroxide 7722-84-1 Methyl Ethyl Ketone 78-93-3 Methyl Ethyl Ketone 78-93-3 Amer Conf of Gov. Indust. Hyg. US Dept of Labor - OSHA Amer Conf of Gov. Indust. Hyg. US Dept of Labor - OSHA TWA:1 ppm TWA:1.4 mg/m3(1 ppm) TWA:200 ppm;STEL:300 ppm TWA:590 mg/m3(200 ppm) Amer Conf of Gov. Indust. Hyg. : American Conference of Governmental Industrial Hygienists American Indust.
PAGE 21
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 9.1. Information on basic physical and chemical properties Liquid General Physical Form: Slight odor. Clear. Odor, Color, Grade: No Data Available Odor threshold No Data Available pH No Data Available Melting point 244 ºF Boiling Point > 200 ºF [Test Method: Closed Cup] [Details: No flash to Flash Point boiling point.
PAGE 22
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority.
PAGE 23
3M™ Bondo® MEKP Liquid Hardener, P.N.
PAGE 24
3M™ Bondo® MEKP Liquid Hardener, P.N.
PAGE 25
3M™ Bondo® MEKP Liquid Hardener, P.N.
PAGE 26
3M™ Bondo® MEKP Liquid Hardener, P.N.
PAGE 27
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14 Dimethyl Phthalate 131-11-3 Trade Secret 30 - 60 15.2. State Regulations Contact 3M for more information. 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S.