User's Manual

1 2 3 4 5
6
7 8 9
Reader Configuration Tool
IDentity 5200 User Guide 47
Expert Configuration – Tag
This page allows you to configure how the reader reports tags.
The IDentity 5200 supports the ability to filter tags. Filtering tags means to
eliminate tags from being reported based on the conditions specified in the
filter configuration variables. The reader supports eight filters and each
filter is specified by the following configuration variables:
h enabled – Enables or disables the filter.
h
inclusive – Indicates to either include tags that match (Inclusive) or
include tags that do not match (Exclusive) the tag filter.
h
mask – Mask (as an array of hex bytes) for the tag filter.
h
name – Name given to the tag filter
h
pattern – Pattern (as an array of hex bytes) for the tag filter
The following figure shows only a small sample of the available tag
configuration variables.