User's Manual

1 2 3 4
5
6 7 8 9
Reader Startup Tool
IDentity 5200 User Guide 23
RTT has several pull-down menus for logging into the reader, selecting the
operating mode, activating protocols, and selecting antennas:
Reader
Login – Select to enter your login user name. The default login is guest . If
you need administrator privileges, login as
admin . Enter readeradmin as the
password if you logged in as
admin .
View Error Log – Select to view any errors generated by the reader. Errors
are displayed in a separate window. Use Notepad to edit the error list.
Clear Error/Warning Condition – Select to clear the reader of any errors
and warnings.
Operating Mode
Active – Reader is continuously attempting to singulate tags and
automatically reports any singulated tag via an asynchronous event
notification on the event channel.
Standby – Reader is not transmitting any energy, unless processing a tag
related command. The RF transmitter is enabled at the beginning of the
command processing, any protocol operations required for the command
are performed, and then the RF transmitter is turned back off.
Protocol
Select the protocol(s) for the tags you will be reading.
Antenna
Select the ports that have antennas connected. You can also select the
antenna multiplexer sequence. Select
Mux Sequence and enter the order
that antennas are to be activated.