Datasheet

3M Personal Safety Division
Storage Position: When the helmet is not in use, ensure the earmuffs are in Work Mode Position and the arms are not pressing
against the helmet.
For complete product information refer to the user instructions.
This hearing protector helps reduce exposure to hazardous noise and other loud sounds. Misuse or failure to wear hearing
protection at all times when exposed to hazardous noise may result in hearing loss or injury. For correct use, consult
supervisor and User Instructions, or call 3M Technical Services at [phone]. If your hearing seems dulled or you
hear a ringing or buzzing during or after any noise exposure (including gunfire), or for any other reason you suspect a hearing
problem, leave the noisy environment immediately and consult a medical professional and/or your supervisor.
Personal Safety Division
3M Svenska AB, Box 2341
SE-331 02 Varnamo
Sweden
www.3M.com/PELTOR
[phone]
3M PSD products are
occupational use only.
© 2023, 3M. All rights reserved.
3M, 3M Science. Applied to Life., and PELTOR are
trademarks of 3M.
Used under license in Canada. All other trademarks
are property of their respective owners.
Please recycle.
Ventilation Mode: To switch the unit from Work Mode to Ventilation Mode, pull outward on the ear cups until you hear a
click.
Up Position: Lift
the cups to the fixed Ventilation Mode Position and rotate to the back of the helmet. Avoid placing
the cups against the helmet. This position is not acceptable when hearing protection is required or for storage.