Brochure

1” MODELS:
3MWTS100 • 3MWTS150 • 3MWTS200
1.25” MODELS:
3MWTS150-125 • 3MWTS200-125 • 3MWTS300-125
IMPORTANT
3M Purication Inc.
400 Research Parkway
Meriden, CT 06450
855-3M-WATER (855-369-2837)
www.3MWater.com
The 3M Water Softeners are made in the
USA with Globally sourced components.
3M is a trademark of 3M Company.
Water Quality Association Tested and Certied Under Industry
Standards is a trademark of Water Quality Association
© 2016 3M Company. All rights reserved.
70020252204 REV 0616
INSTALLATION DIFFICULTY
SPECIFICATIONS
Skills Needed: (Please refer to installation difculty chart on website
for additional information)
• Professional installation required
3M Purication Inc. warrants this Product will be free from defects in material and manufacture for the following periods from the date of purchase.
• Ten (10) years on the lter tank • Ten (10) years on the brine tank • Five (5) years on the valve body
• Five (5) years on the electronics • Five (5) years on the resin media
This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purication Inc. or failure to follow installation and use instructions. No
warranty is given as to the service life of any lter cartridge, as it will vary with local water conditions and water consumption. 3M Purication Inc. MAKES NO OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product fails to satisfy this Limited Warranty during the war-
ranty period, 3M will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy
and 3M Purication Inc.’s exclusive obligation. For additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction Manual.
Limitation of Liability. 3M Purication Inc. will not be liable for any loss or damage arising from this 3M Purication Inc. product, whether direct, indirect, special, incidental, or conse-
quential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
LIMITED WARRANTY
Category
1" Models
3MWTS100 3MWTS150 3MWTS200
Media Size
cu ft. (liters)
1.0 (28) 1.5 (42) 2.0 (57)
Salt Dosage *
lbs. (kg)
4 (1.81)
6.0 (2.72)
16 (7.26)
6.0 (2.72)
9.0 (4.08)
16.0 (17.26
8.0 (3.63)
12.0 (5.44)
24.0 (10.89
Salt Efciency 4,000 4,000 4,200
Softening Capacity**
(grains)
16,150
20,600
28,100
24,000
30,650
40,300
33,750
46,150
59,100
Service Flow Rate (lpm)
@ 15 PSID
8.9 gpm (33.6) 11.1 gpm (42.0) 15.3 gpm (57.9)
1.25” Models
3MWTS150-125 3MWTS200-125 3MWTS300-125
Media Size
cu ft. (liters)
1.5 (42) 2.0 (57) 3.0 (85)
Salt Dosage *
lbs. (kg)
6.0 (2.72)
9.0 (4.08)
16.0 (7.26
8.0 (3.63)
12.0 (5.44)
24.0 (10.89
12.0 (5.44)
18.0 (8.16)
36.0 (16.33)
Salt Efciency 4,200 4,200 4,200
Softening Capacity**
(grains)
24,000
30,650
40,300
33,750
46,150
59,100
50,950
69,700
89,250
Service Flow Rate (lpm)
@ 15 PSID
12.6 gpm (47.7) 16.3 gpm (61.7) 17.5 gpm
Dimensions can be found in Product Specications
Table on reverse side.
(Note: 3 cubic foot systems utilize a round salt tank.)
10" REF
B
A
C
OFF
OFF
OFF
OFF
* Salt Dosage: Top row indicates salt efcient setting, second row indicates factory setting and third
row indicates maximum setting with the supplied brine tank
**Softening Capacity: Top row indicates salt efcient setting, second row indicates factory salt setting
and third row indicates maximum salt setting with the supplied brine tank
NOTE: These softeners meet or exceed California Salt Efciency requirements when salt dose is set at
the salt efcient setting. Efciency claim is only valid at the salt efciency setting.
WARNING: Read entire manual. Failure to follow all guides and rules could cause personal
injury or property damage.
• Check with your local public works department for plumbing codes. You must follow their
guidelines as you install the Water Treatment system.
• Your Water treatment system will withstand up to 125 pounds per square inch (psi) water pressure.
If your house water supply pressure is higher than 80 psi, install a pressure reducing valve before
installing the Water Filtration system.
To reduce the risk associated with the ingestion of contaminants:
• DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTICE: To reduce the risk associated with water leakage or ooding:
• Read and follow Use Instructions before installation and use of this s ystem.
3M recommends regularly scheduled maintenance and replacement of the resin media in order
for the product to perform as advertised. Contact your 3M Authorized Water Dealer for service and
support. 3M Purication Inc. shall not be liable for system failures due to improper maintenance.
The 3MWTS Series softeners are tested and certied by
WQA against NSF/ANSI 372, CSA B483.1, and NSF/ANSI
Standard 44 with an efciency rating for water hardness,
barium, and radium reduction.