Overview of Primary Product

HOW TO CHANGE DAYS BETWEEN REGENERATION

STEP 1

Press and hold SET HOUR and buttons simultaneously for three (3) seconds and release.

STEP 2

Press SET HOUR button.

STEP 3

Press and buttons to change the number of days between regenerations.

STEP 4

Press SET HOUR to return to the display mode.

Note: Your Backwash Filtration System is factory preset for 4 days between regenerations.

HOW TO CHANGE TIME OF REGENERATION

STEP 1

Press and hold SET HOUR and buttons simultaneously until the display begins ﬂ ashing (usually about three (3) seconds).

STEP 2

Set the clock display to the desired hour of regeneration by pressing or button. An arrow will appear in the display

pointing to PM during PM hours.

STEP 3

Press and release SET HOUR and buttons simultaneously to return to the display mode.

Note: Your Backwashing Filtration System is factory set to regenerate at 1:00 AM.

HOW TO CHANGE THE REGENERATION PROGRAM SETTINGS

STEP 1

Press and hold SET HOUR and buttons simultaneously until the display begins ﬂ ashing (usually about three (3) seconds).

STEP 2

Press and hold SET HOUR and buttons simultaneously until the display begins ﬂ ashing (usually about three (3) seconds).

STEP 3

Press the button to change the display to P8 or P9.

STEP 4

Press the SET HOUR button ﬁ ve (5) times to return to the display mode. The time of day should be in the display.

2-6