Overview of Primary Product

HOW TO SET TIME OF DAY

STEP 1

Press SET HOUR and release.

STEP 2

Set the clock display to the closest hour by pressing the or . An arrow will appear in the display pointing to PM during

PM hours.

STEP 3

Press SET HOUR to return to the display mode.

Note: After an extended power outage the time of day may need to be reset.

HOW TO MANUALLY INITIATE IMMEDIATE REGENERATION

STEP 1

Press and hold and buttons simultaneously until valve motor starts (usually about three (3) seconds).

Note: Once a manual regeneration has been initiated, it cannot be stopped.

STEP 2

Once the valve display is in C1, it is in Backwash. To advance to Rapid Rinse press and hold and buttons simultane-

ously until valve motor starts (usually about three (3) seconds).

STEP 3

Once the valve display is in C4, it is in Rapid Rinse. To advance to the display mode, press and hold and buttons

simultaneously until valve motor starts (usually about three (3) seconds).

HOW TO MANUALLY INITIATE DELAYED REGENERATION

STEP 1

Press and release the and buttons simultaneously.

Note: An arrow will appear in the display pointing to Regen indicating regeneration will occur at the programmed time.

2-5