User's Manual

http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User’s Guide
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
21
Item Description
Authentication Type
Click to select the authentication type in Open
System, Shared Key or Auto selection.
Fragment Threshold Set the data packet fragmentation threshold, value
can be written between 256 and 2346 bytes.
RTS Threshold Set the RTS Threshold, value can be written
between 0 and 2347 bytes.
Beacon Interval Set the Beacon Interval, value can be written
between 20 and 1024 ms.
Data Rate Select the transmission data rate from the pull-down
menu. Data rate can be auto-select, 11M, 5.5M, 2M
or 1Mbps.
Preamble Type
Click to select the Long Preamble or Short
Preamble support on the wireless data packet
transmission.
Broadcast SSID Click to enable or disable the SSID broadcast
function.
IAPP Click to enable or disable the IAPP function.
802.11g Protection Protect 802.11b user.
WMM Click Enabled/Disabled to init WMM feature.
RF Output Power To adjust transmission power level.
Turbo Mode Click to Enable/Disable turbo mode. (Only apply to
the application of DWR to DWR).
Apply Changes
Click the Apply Changes button to complete the
new configuration setting.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.